.

Flammability limits tester for gases and vapors

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

The Flammability Limits Tester is suitable for:

Determining the upper and lower flammability limits of chemical gases and vapors.

Safety evaluation of industrial gas mixtures in laboratories and production facilities.

Research on combustible gas behavior under controlled temperature and pressure conditions.

Specific Testing Equipment:

Combustible gas sample containers

Gas mixing and vacuum control modules

Ignition control systems

Temperature and pressure monitoring devices

Standards

The system complies with the following national and international standards:

GB/T 21844-2008 – Standard Test Method for Flammability Limits of Compounds (Vapors and Gases) (China)

ASTM E918-19 – Standard Test Method for Flammability Limits of Chemicals at Elevated Temperatures and Pressures

ISO 10156 – Gases and Gas Mixtures – Determination of Flammability Limits

EN 1839 – Determination of Flammability Limits of Gaseous Fuels

Parameters

UnitSpecification
Environmental Temperature Adjustable: ambient ~ 200 °C, control accuracy ±1 °C
Sealed Container Standard 8 L stainless steel vessel
High-Precision Pressure Sensor Range: 0–200 kPa (absolute), for precise gas mixing
Conventional Pressure Sensor Range: -0.1~3 MPa, for auxiliary container pressure monitoring
Auxiliary Gas Source Air / Nitrogen / Test gas
Dimensions 800 (W) × 600 (D) × 1300 (H) mm
Power Supply AC 220 V, 50/60 Hz, 10 A
Weight Approx. 150 kg

Accessories

Stainless steel 8 L sealed container

Dedicated vacuum pump

Rubber stopper with pressure relief device

Gas mixing, vacuum, and pressure monitoring interfaces

Internal ignition device with interlock protection

Temperature sensor port

Observation window

Siemens PLC system with analog modules

7-inch HMI touchscreen

Data acquisition and storage modules


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

E-bike chassis dynamometer testing machine
E-bike chassis dynamometer testing machine Whats/App: +86 156 1874 6768 Web: standard-groups.com Electric bicycles are complex systems involving mechanical, electrical, and control compone...
Cleanliness Analysis System
Cleanliness Analysis System Whats/App: +86 156 1874 6768 Web: standard-groups.com Production: The cleanliness analysis system fully complies with the requirements of standa...
Electric Cables Halogen Acid Gas Release Tester,Cable Halogen Acid Gas Release Test Machine
Electric Cables Halogen Acid Gas Release Tester,Cable Halogen Acid Gas Release Test Machine Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This apparatus is widely used in laboratories and quality control departments ...
Protective Clothing Synthetic Blood Penetration Tester
Protective Clothing Synthetic Blood Penetration Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction It is applicable to the resistance of the protective clothing to the syntheti...
Cabin Air Filter Test System(Gas Adsorption), ISO 11155 Cabin Air Filter Test Chamber
Cabin Air Filter Test System(Gas Adsorption), ISO 11155 Cabin Air Filter Test Chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com The Filter Test System for gas adsorption/desorption of air filters for passenger compartme...
Все товары поставщика

Похожие товары

Сварочная проволока из нержавеющей стали с флюсовым сердечником E308T1-1 E308HT1-1 E308LT1-1, газозащитная проволока FCAW для сварки нержавеющей стали марки 304
Сварочная проволока из нержавеющей стали с флюсовым сердечником E308T1-1 E308HT1-1 E308LT1-1, газозащитная проволока FCAW для сварки нержавеющей стали марки 304 Продавец: 863048 Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ...
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point Продавец: 863048 Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержание флюса, диаметр 1.0/1.2/...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding Продавец: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal Продавец: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner Продавец: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...