ISO 14577 Nano Indenter for Thin Film Mechanical Property Analysis
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Nano Indenteris a comprehensive micro- and nano-mechanical testing system that integrates four functional modules: nanoindentation, nanoscratch, microindentation, and microscratch. Its modular design allows you to perform indentation, scratch, and friction-wear tests on the same device, ranging from nanoscale to high-load microscale. The instrument provides data on hardness, elastic modulus, creep behavior, elastic-plastic properties, fracture toughness, stress-strain curves, film-substrate adhesion, scratch hardness, friction coefficient, and wear rate, offering a full view of microscopic mechanical properties.
Standards
ISO 14577-1/2/3: Nanohardness and elastic modulus testing of metallic and non-metallic materials
ASTM E2546: Calibration of micro- and nanoindentation instruments
ISO 20502: Nanoscratch testing
ISO 1518: Coating scratch testing
ASTM D7027. D1624. D7187. C171: Scratch testing for coatings and plastics
Technical Specifications
| Module | Parameter | Specification |
|---|---|---|
| Nano Indenter | Max Load | 80 mN / 400 mN / 1800 mN / 4800 mN |
| Min Load | 0.1 mN | |
| Load Resolution | 3 nN | |
| Penetration Depth | 250 μm / 1 mm | |
| Displacement Resolution | 0.0003 nm | |
| Loading Rate | 0.04–12000 mN/min | |
| Nano Scratch | Max Scratch Force | 80 mN / 400 mN / 1800 mN / 4800 mN |
| Scratch Speed | 0.05–600 mm/min | |
| Max Friction Force | 400 mN / 1800 mN | |
| Micro Indenter | Max Load | 40 N / 200 N |
| Min Load | 2 mN / 10 mN | |
| Depth Resolution | 0.01 nm | |
| Penetration Depth | 1 mm | |
| Micro Scratch | Max Load | 40 N / 200 N |
| Max Scratch Length | 50 mm | |
| Max Friction Force | 20 N / 200 N | |
| Precision Positioning Stage | XY Range | 100 mm × 50 mm |
| Z Space | 150 mm | |
| Optical Metallographic Microscope | Magnification | 5X, 10X, 20X, 50X, 1000X (Total 400X–8000X) |
| Atomic Force Microscope (AFM) | Scan Range | 100 μm × 100 μm × 12 μm |
| XY Resolution | 0.1 nm | |
| Z Resolution | 0.02 nm | |
| General | Thermal Drift | <0.05 nm/s (compensated <1 nm) |
| Displacement Accuracy | Grating positioning ≤250 nm | |
| Max Indentation Depth | 1 mm | |
| Max Friction Force | 400 N | |
| Power Supply | AC 220V / 50Hz |
Features
Modular Integrated Design: Combines nano and micro indentation, scratch, and friction-wear tests in one instrument.
International Standard Compliance: Indentation tests conform to ISO 14577 and ASTM E2546; scratch tests conform to ISO 20502. ISO 1518. ASTM D7027. and others.
High-Precision Load System: Closed-loop piezoelectric drive ensures precise and stable load control, superior to traditional cantilever or open-loop systems.
Nanometer-Level Displacement Control: Depth is monitored in real-time by a capacitive sensor, with 0.0003 nm resolution and minimal thermal drift.
High-Accuracy Positioning Stage: Grating-based XY stage ensures repeatability of experiments.
Full-Field Scratch Imaging: Enables optical imaging throughout nanoscratch tests for easier analysis.
Fast Indentation and Scratch Mapping: 100 mapping points can be completed in 5–12 minutes.
Patented Technology: Diamond tip area function calibration ensures accurate and reliable indentation and scratch measurements.
Accessories
| No. | Accessory / Consumable | Quantity | Note |
|---|---|---|---|
| 1 | Diamond Indenter Tip | 1 | R-shaped tip, compatible with nano & micro modules |
| 2 | Diamond Scratch Tip | 1 | For nano/micro scratch tests |
| 3 | Constant Load Weights | Several | For micro/high-load calibration |
| 4 | Sample Fixture | 1 set | Fits various sample sizes |
| 5 | Optical Microscope Module | 1 set | For scratch imaging |
| 6 | AFM Probe | 1 set | High-resolution surface scanning |
| 7 | Power Cord | 1 set | AC 220V / 50Hz |
| 8 | Safety Cover | 1 | Provides operational protection |
| 9 | Software Installation Disk | 1 set | For data analysis |
| 10 | Tools & Manual | 1 set | Installation and operation guidance |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Gas Oxidizing Property Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of ... |
 |
Wire Repeated Bending Cycle Testing Machine UL Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 238-2013 – Metal Material Wire Repeated Bending Tes... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for interve... |
 |
Coolant pulsation testing machine，Coolant pressure pulse test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Coolant Pulsation Testing Machine is a precision testing system designed to evaluate au... |
 |
Surface Performance Tester STD-FB4 - A | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed b... |
