Adhesion Tester for quality control

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

- Specific standards for different test objects, such as the adhesion test standards for medical gels, cosmetics and skin

- care products, food packaging materials, etc.

- General standards in the adhesive industry, such as GB/T 2792 Test Method for 180°Peeling Strength of Pressure

- Sensitive Adhesive Tapes, ASTM D3330 Standard Test Method for Peel Adhesion of Pressure - Sensitive Tape, etc. These standards specify in detail the test methods for the adhesion tester, specimen preparation, test conditions, etc., providing a unified standard for the use of the tester.

Features

1. 7-inch touchscreen control, stylish human-machine interface

2. Lead screw drive system, greatly improving the accuracy of transmission displacement and enabling stepless speed regulation.

3. Allows for parameter setting, printing, clearing, calibration, and other operations.

4. Calibration interface password protected to prevent errors in calibration force values due to accidental operation.

5. Features power-off memory, overload protection, and line position protection.

6. The instrument has applied for a patent for its sensor protection device function, patent number: ZL.8

7. Equipped with a standard USB interface and a printer interface for easy connection to a computer.

8. The instrument can complete tests independently, and the mini printer automatically prints the test results.

Technical Parameters

Technical Parameter	Specification
Measurement Range	Usually covering 0 - 30000mN or wider (adapts to different materials). Some devices have a smaller range (e.g., 0.01N - 100N), suitable for materials with relatively low adhesion.
Measurement Accuracy	Generally grade 0.5 or higher; ensures the accuracy of test results.
Stroke	Usually 650mm or longer; meets requirements of different specimen sizes and test methods.
Pressing Roller Mass	Usually 2000g±50g; applies pressure to the specimen to ensure tight adhesion between the specimen and the test plate.
Test Speed	Adjustable range: generally 1 - 500mm/min (stepless speed regulation) to simulate different peeling speeds; some devices have a wider speed-adjustment range.
External Dimensions	Usually about 880mm (length) × 320mm (width) × 400mm (height); facilitates placement and movement (dimensions vary by brand/model).
Power Supply	Usually AC 220V 50Hz (ensures normal operation of the tester); some devices support other voltages and frequencies.

Accessoriess

Standard Configuration: Main unit, standard fixtures, mini printer

Optional Accessories: Professional software, communication cable, test plate, standard pressure roller, sampling knife, custom-made non-standard fixtures

Note: This machine can operate independently. If connection to a computer is required, the computer must be provided by the user. The mini printer is thermal.

Test Procedures

1. Equipment Preparation

Connect to AC 220V 50Hz power supply. Use a standard adhesion sample calibration device conforming to GB/T 2792 (ensuring measurement accuracy of 0.5 grade or higher). Confirm that the pressure roller (2000g±50g), clamps, and other components are in normal condition.

2. Sample Preparation

According to the test object (e.g., medical adhesive removal, food packaging materials),

cut the sample according to the corresponding standard (e.g., ASTM D3330) (e.g., for 180-degree peel tests, the sample size must match). Clean the sample and test plate surfaces (remove impurities to avoid affecting adhesion).

3. Parameter Settings

Select the compliant standard (e.g., GB/T 2792) through the instrument interface, set the measurement range (e.g., 0-30000mN), and test speed (1-500mm/min, select as needed). 4. Sample Adhesion and Clamping

Affix the sample to the test plate and roll it back and forth with the pressure roller a specified number of times (e.g., the number of rolls required by the standard) to ensure a tight fit between the sample and the test plate.

Then, fix the test plate/sample to the instrument fixture, aligning it with the force direction of the peel/adhesion test (e.g., the fixture angle for a 180-degree peel).

5. Start the Test

After confirming that the clamping and parameters are correct, start the test program. The instrument will automatically complete the adhesion force test at the set speed and record the force value data in real time.

6. Result Processing

After the test, export the data and determine whether the adhesion force meets the requirements by referring to the corresponding standard (e.g., ASTM D3330). If multiple tests are required, repeat the sample clamping and testing steps.

7. Post-processing

Remove the sample, clean the fixture, pressure roller, and test plate, and turn off the equipment power.

Другие товары поставщика

	Sliding bearing PV friction testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test m...
	Horizontal Combustion Tester ISO 6941 Horizontal Burning Test Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Overview TheHorizontal Combustion Testeris a standardized instrument designed to e...
	G506 Mask Automatic Filter Performance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application G506 Mask Automatic Filter Performance Tester is used fortestingprofessional f...
	Universal Wear Tester(UWT)/Stoll Quartermaster	Whats/App: +86 156 1874 6768 Web: standard-groups.com The universal wear testing machine features a fully automatic testing mode with automatic c...
	High and Low Temperature Material Impact Resistance Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com High-Low Temperature Multifunctional Aggregate Impact Tester is a professiona...

Все товары поставщика

Похожие товары

	China factory electrode TGYS125 for power station Selection of advanced	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f...
	Laser Chuck	Продавец: 00000	Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
	Power Pallet Jack For Sale	Продавец: Jinan Hulk Machinery Co., Ltd	Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
	Multi Directional Forklift For Sale	Продавец: Jinan Hulk Machinery Co., Ltd	Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
	Narrow Aisle Forklift For Sale	Продавец: Jinan Hulk Machinery Co., Ltd	Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...