Building Material Fire Endurance Test Furnace OEM Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
The furnace incorporates advanced design and control technology to ensure stable, accurate, and repeatable testing.
Control System
Touchscreen and PC dual-control interface
Wireless connection supported; one PC can manage multiple furnaces
Automatic elimination of faulty thermocouples to maintain curve accuracy
Testing Performance
Full-automatic testing process from ignition to cooling
Real-time tracking of temperature and pressure curves
Automatic re-ignition if the flame is extinguished during testing
Automatic stop when reaching preset temperature or test duration
Safety and Reliability
Anti-power-off protection mode to avoid damage caused by sudden shutdown
Automatic cooling and exhaust system at the end of the test
Temperature deviation consistently lower than the limits required by GB standards
Data Management
Storage capacity for more than 100 sets of test data
Curve display for furnace temperature, back-surface temperature, and pressure
User-friendly interface for on-site operation or remote control
Parameters
| Item | Specification |
|---|---|
| Working Voltage | AC 220V ± 10%, 50 Hz |
| Power Consumption | 3 kW |
| Furnace Pressure Range | 0–100 Pa |
| Pressure Control Accuracy | 20 ± 3 Pa |
| Airflow Range | 0–50 m³/min |
| Airflow Accuracy | ≤ ±0.5 m³/min |
| Fuel Type | 0# or −10# diesel |
| Standard Fire-Curve Temperature Program | 60 min: RT–925°C; 120 min: RT–1050°C; 180 min: RT–1115°C; 240 min: RT–1150°C; 300 min: RT–1180°C; 360 min: RT–1210°C |
| Furnace Temperature Sensors | 4 pcs K-type armored thermocouples |
| Back-Surface Temperature Sensors | 2 pcs, accuracy ±4°C |
| Temperature Control Mode | Average or independent control |
| Heating Mode | Fully automatic diesel spray burner |
| Cooling Mode | Automatic exhaust and cooling |
| Timing Range | 0–360 min |
| Data Storage Capacity | ≥100 sets |
| Sample Size | 500 × 500 × 6 mm |
| Overall Dimensions | 1.6 m × 1.6 m × 1.6 m |
Test Procedures
1. Cut the sample using a 250mm × 90mm template. If the sample is a melt-shrinkable product, use a 250mm × 180mm template.
2. Clamp the sample in a 250mm × 90mm sample holder, tighten the wing nut, and secure the sample. The sample holder size for melt-shrinkable products is 250mm × 180mm. At this point, do not yet mount the sample holder onto the horizontal rod.
3. Turn on the power switch and set the ignition time to a slightly longer duration, such as 5 minutes. Select the appropriate positioning device according to the ignition method. After pressing "Start Test" and the burner stops at the 45° position, insert one end of the positioning device into the burner. Now mount the sample holder onto the horizontal rod and adjust the sample holder's up, down, left, and right positions to meet the test requirements. Remove the positioning device. Press the return key. After the burner resets, press "Test Reset".
4. Press and hold the ignition button, and simultaneously adjust the flame adjustment valve on the instrument panel. After igniting the gas, adjust the flame height to 20 ± 1mm. When adjusting the flame from large to small, it is easier to first tighten the flame adjustment knob on the panel. The height gauge should be at 20mm. Close the front door.
5. Place two pieces of filter paper in the collection tray and then place it under the sample.
6. Set the ignition time, press "Start Test," and the burner will automatically rotate to the 45° position and remain there for the set ignition time, then reset. The afterglow time starts counting simultaneously. If the sample stops afterglow before reaching the marked line, press "Stop Afterglow." If the sample afterglow reaches the marked line, immediately press "Stop Afterglow." Record the burning time.
7. Press "Test Reset" to stop the test. To continue the test, repeat the above steps; otherwise, turn off the power. Provided by Shandong Provincial Textile Science Research Institute.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Limiting Oxygen Index Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Limiting Oxygen Index (LOI) fire test is perhaps the most economical and precise qualit... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possib... |
 |
IEC Standard Damp Heat and Freeze Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Thermal Cycling Damp Heat and Freeze Test Chamber is an environmental reliabi... |
 |
IEC Compliant Infrared and Microwave Test Dummy | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can be used to verify and evaluate compliance with the following stan... |
 |
Protective Clothing Resistance Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for S... |
Похожие товары
 |
China factory electrode TGYS125 for power station Selection of advanced | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f... |
 |
Laser Chuck | Продавец: 00000 | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
 |
Narrow Aisle Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide... |
