Fire Retardant Coatings Tester, ASTM E84 Tunnel Test Equipment
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Technical parameters
| Item | Description |
|---|---|
| Burner Top Diameter | 20mm |
| Burner Height | Approximately 200mm |
| Burner Blue Flame Temperature | (900±20)°C |
| Combustible Gas Source | Natural gas, liquefied petroleum gas, or city gas |
| Thermocouple | Armored thermocouple with precision of work grade, K type, outer diameter not greater than 3mm |
| Electronic Potentiometer | Error less than ±0.5% of the measured temperature |
| Ignition System | High voltage electronic ignition system |
Test Procedures
Equipment Composition: The tunnel method tester consists of a main control box and a combustion chamber. The combustion chamber is a tunnel furnace welded from a metal steel frame, equipped with natural ventilation ports, gas supply ports, and a graduated observation window. The control box is equipped with a digital display temperature control system, a gas flow rate adjustment device, and a combustion temperature recorder.
Test Conditions: The test uses a standard flame of 900±20℃. Temperature monitoring is achieved through thermocouples and an electronic potentiometer. Environmental conditions must meet the requirements of a temperature of 5–35℃ and a relative humidity of ≤85%.
Test Procedure: Under laboratory conditions, the flame propagation characteristics are tested using the tunnel method tester to evaluate the protective effect of the fire-retardant coating on the substrate and the quality of its flame propagation performance.
Results Analysis: Through quantitative analysis, the performance of the fire-retardant coating is evaluated, providing an objective basis for the use and selection of fire-retardant coatings.
The tunnel method test provides objective experimental evidence for the performance evaluation of fire-retardant coatings and is suitable for quantitatively testing the flame retardant performance of fire-retardant coatings applied to the surface of substrates under laboratory conditions.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Resistance to flame propagation tester,ECE R118 Annex 10 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This equipment is designed and manufactured according to ECE R118 Annex 10. T... |
 |
Damp Heat Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Heat Test Chamber is suitable for: Damp-heat performance testing of ... |
 |
Room Corner Tester，Room corner fire test equipment， ISO 13784 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction According to ISO9705 of building materials fire prevention performance standa... |
 |
Protective glove thermal resistance test equipment supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Glove Thermal Insulation Tester is a precision instrument designed to eva... |
 |
Aluminum Foil Pinhole Detector for industry | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The pinhole tester for aluminum foil plays a crucial role in the quality cont... |
