KBA-AJ Linear Bearing Pillow Block 2019

• 

ISUTAMI KBA-AJ adjustment linear bearing pillow block, also known as KBA-AJ clearance-adjusting linear bearing unit,linear bearing pillow block europe,KBA-AJ clearance-adjusting linear slide unit or KBA-AJ clearance-adjusting linear case housing (unit), is a suitable for linear motion products in the European market. AJ is an abbreviation for adjustment. This model consists of an adjustable aluminum housing with 4 fixing holes and a matching KB-AJ adjustment linear bearing. The unit has a screw and screw hole for adjusting the aluminum casing. There are also two rubber seals (UU) at both ends of the linear bearing to prevent debris or ball bearing contamination. In addition, the aluminum housing is used because it is small and light, and has strong corrosion resistance.

KBA-AJ Linear Bearing Pillow Block Features

The KBA-AJ clearance-adjustable linear bearing pillow block is a single-length European metric version, with adjustable clearance. The KB-AJ adjustment linear bearing is mounted inside the housing, it is easier to install on a linear shaft because of its lightly adjustable characteristics, saving time. The advantages of the bushing with clearance also include less tilt or friction, less wear over time, and better machining features.

If you are manufacturing CNC milling machines, milling machines or lathes that require precise linear motion, it is a perfect solution to install this aluminum linear bearing housing with KBA-AJ linear bearings. Aluminum case housing size range: length (L) ranges 30-122mm; width (W) ranges 34-132mm; height (F) ranges 22-144; minimum size item KBA8 combination size is 30*34*22mm, maximum size item SMA60, the combined size is 122*132*144mm and all the product size error is between±0.02mm. These data are the same as KBA standard linear bearing pillow block. The aluminum housing has four CNC drilled holes, threaded holes and countersunk holes of the same size M4-M12, which can be easily and safely mounted to almost any linear motion system.

A typical CNC system consists of a linear shaft of matching diameter, ranging from 8 to 60 mm in diameter, mounted on both ends of the shaft by two end supports, and the bearing housing with adjustment linear bearings runs straight along the shaft. Most CNC machines have two such components mounted side-by-side, using a housing as a stand to support the mobile platform. The housing can be mounted from above or below, making it easy to install into the intended system. Positioning and accuracy enhancement are facilitated by being used as a side aspect of the datum. The extruded aluminum housing is subjected to sufficient extrusion and heat treatment to create a compact, lightweight and precision product.

As one of the most professional ball bearing manufacturers in china, ISUTAMI is committed to providing customers with the best possible quality bearing products at the most reasonable price. If you want to know more details or want a quotation, just feel free to contact us!

Другие товары поставщика

	Standard Linear Bearing SW	ISUTAMI SW standard linear bearings, also known as SW standard linear ball bearings or SW standard linear bushing bearings. SW is the imperial seri...
	Round Flange Mounted Units Pressed Steel 2019	ISUTAMI pressed steel round flange mounted unit, also known as ISUTAMI 3-bolt pressed steel round flange mounted bearing unit, it consists of two m...
	Long Pilot Pattern Square Flange Linear Bearing LMKP-L 2019	ISUTAMI LMKP-L long pilot pattern square flange linear bearing, also called LMKP-L long pilot pattern square flange linear ball bearing or LMKP-L l...
	Plastic Mounted Bearing 2019	ISUTAMI plastic mounted bearing adopts stainless steel bearing and engineering plastic base. Various engineering plastic series of ISUTAMI, such as...
	Agricultural Bearing Hex Bore Series	ISUTAMI hex bore series agricultural bearing is a kind of regular agricultural bearing. Its appearance is similar to that of disc harrow bearings a...

Похожие товары

	Tandem roller bearing M4CT3278 with shaft 78x32x110.5mm	Продавец: JinHang Precision Bearing Co.,LTD	The tandem roller extruder bearing m4ct3278 that use for PVC screw extruder gearbox, the shaft di...
	Tandem roller bearing F-86722 for Rubber extrusion machine	Продавец: JinHang Precision Bearing Co.,LTD	The bearing f-51909 t3ar mainly used in the twin screw plastic extrusion machine gearbox.The bear...
	Tandem roller bearing t6ar3278 for the extruder shaft gearbox	Продавец: JinHang Precision Bearing Co.,LTD	The bearing T6 AR 3278 with size 32X78X163.5mm mainly used for the high speed extruder machine ge...
	Tandem roller bearing MTCT2468 for Screw extrude gearbox	Продавец: JinHang Precision Bearing Co.,LTD	The bearing M5CT2468 for food/feed/plastic/rubber extrusion machine gearbox use. With high perfor...
	twin screw extruder gearbox used t5ar3278 bearing	Продавец: JinHang Precision Bearing Co.,LTD	Bearing T5AR3278 fullsize 32x78x137mm bearing actual picture, Please reference them. Bearing fact...