KBA-L Linear Bearing Pillow Block 2019

• 

ISUTAMI KBA-L long linear bearing , also known as KBA-L extended linear bearing unit, KBA-L extended linear slide unit or KBA-L extended linear case housing (unit), is a suitable series for European market. L is an abbreviation for Long. This model consists of a long type aluminum housing with 4 fixing holes as well as two KB standard linear bearings. There is an oil hole on the unit side and one circlip on each end in the proper position. There are also two rubber seals (UU) at both ends of the linear bearing to keep back debris or ball bearing contamination. The aluminum casing is applied because it is small and lightweight, this kind of material has strong corrosion resistance.

KBA-L Linear Bearing Pillow Block Features

The KBA-L linear bearing pillow block housingis a closed, double-length European metric version. The two KB standard linear bearings are mounted in the housing and arranged in a straight line in the aluminum casing. Advantages of the bearing bushing include less tilt or friction, less wear over time, and better machining results.

If you are manufacturing CNC milling machines, milling machines or lathes that require precise linear motion, it is a perfect solution to install this long aluminum bearing housing with KB standard linear bearings. Aluminum housing size range: length (L) ranges 58-230mm (matching KB standard linear bearing length (L) ranges 25-100mm); width (W) ranges 34-122mm; height (F) ranges 22-102mm. The minimum combined size of the specification KBA8L is 58*34*22mm, and the largest combined specification KBA50L is 230*122*102mm. These data are basically the same as the SMA-L extended type linear bearing pillow block, except that the KBA-L series has no diameter of 12mm and 35mm. The aluminum housing has four CNC drilled holes, threaded holes and countersunk holes of the same size M4-M10, which can be easily and safely mounted to almost any linear motion system.

A typical CNC system consists of a linear shaft of matching diameter, ranging from 8 to 60 mm in diameter, mounted on both ends of the shaft by two end supports, and the housing of the extended linear bearing runs straight along the shaft. Most CNC machines and 3D printers have two such components mounted side-by-side, using a housing as a stand to support the mobile platform. This is a long unit able to be mounted from above or below, making it easy to incorporate into the intended system. Positioning and precision enhancements are facilitated with one of the side aspects serving as datum face. The extruded aluminum case has undergone sufficient post-extrusion heat treatment to create a compact, lightweight and precision item.

As a professional bearing manufacturing company in china, ISUTAMI is committed to providing customers with the best possible quality bearing products at the most reasonable price. If you want to know more details or want a quotation, just feel free to contact us!

Другие товары поставщика

	Agricultural Bearing Hex Bore Series	ISUTAMI hex bore series agricultural bearing is a kind of regular agricultural bearing. Its appearance is similar to that of disc harrow bearings a...
	Long Pilot Pattern Square Flange Linear Bearing LMKP-L 2019	ISUTAMI LMKP-L long pilot pattern square flange linear bearing, also called LMKP-L long pilot pattern square flange linear ball bearing or LMKP-L l...
	Standard Linear Bearing SW	ISUTAMI SW standard linear bearings, also known as SW standard linear ball bearings or SW standard linear bushing bearings. SW is the imperial seri...
	Round Flange Mounted Units Pressed Steel 2019	ISUTAMI pressed steel round flange mounted unit, also known as ISUTAMI 3-bolt pressed steel round flange mounted bearing unit, it consists of two m...
	Plastic Mounted Bearing 2019	ISUTAMI plastic mounted bearing adopts stainless steel bearing and engineering plastic base. Various engineering plastic series of ISUTAMI, such as...

Похожие товары

	Многостепенний тандемный точный роликовый подшипник T-3092-6A на складе	Продавец: JinHang Precision Bearing Co.,LTD	Номер фабрики подшипников: Т-3092-6АКод товара: T-3092-6AСтруктура: Основный тип тандемного тяги ...
	Пищевой винтовый экструдер многоступенчатые тандемные подшипники Т-2872-6А	Продавец: JinHang Precision Bearing Co.,LTD	Номер фабрики подшипников: Т-2872-6АКод товара: T-2872-6AОригинальное место: Китай LuoYangСмазани...
	Фильмовый винтовой экструдировальный станок, редуктор, шарикоподшипник tandem roller T-25105 8A	Продавец: JinHang Precision Bearing Co.,LTD	Конструкционная фабрика №: T-25105 8AАртикул: T-25105.8AОригинальное место: Китай, ЛоянСмазка: ма...
	ПВХ винтовая экструзия оборудования коробки передач роликовые подшипники T-25105 8A	Продавец: JinHang Precision Bearing Co.,LTD	Применение: коробки передач для одновинтовых и двойных экструдов в резиновой и пластмассовой пром...
	Food extruder multi-stage tandem thrust bearings T-25105.6A factory	Продавец: JinHang Precision Bearing Co.,LTD	Номер фабрики подшипников: Т-25105.6АКод товара: T-25105.6AОригинальное место: Китай LuoYangСмаза...