GATE VALVE SEAT
GATE VALVE SEAT
valve seat
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.
PRODUCT PARAMETERS FOR Stainless Steel Valve Seats
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve. Elastic sealing material and small actuator's thrust force is used to obtain tight seal of air bubble, compression valve seat's sealing stress elastically deforms the material and squeezes it into the rough surface of the matching metal part to block all leakage paths. The permeability of material is a basis for small amount of leakage for fluid. The seal must be carefully fixed to prevent cracking and air leakage due to differential pressure. Bonding soft valve seat to metal part is one way, but it cannot completely solve the problem because the bond breaks and fails when exposed to thermal shock. A sufficiently large pressure drop will destroy the bonding material. Thermal spraying technologyultrasonic spraying equipment is used to optimize thermal spraying process so that the denseness of coating can meet the gas sealing requirements under up to 140MPa, the porosity of coating <1%, the bonding strength exceeds 75MPa, the hardness can reach HV1500 and the hardness uniformity fluctuates by no more than HV100; the product surface after coating can reach mirror surface, with roughness less than Ra0.1, and flatness no more than 2 bands, which can effectively reduce the coefficient of friction between Valve Gate and valve seat and improve its service life.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
TUNGSTEN CARBIDEN VALVE SEAT | TUNGSTEN CARBIDEN VALVE SEAT Stainless steel Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spool in t... |
|
|
GATE VALVE SEAT | GATE VALVE SEAT valve seat Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and c... |
 |
valve Seat And Thermal Spraying | Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Ge... |
 |
Tungsten carbide valve gate FAQ FOR CLIENTS | Stainless steel valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistanc... |
 |
INTRODUCTION TO HVOF Coating | INTRODUCTION TO HVOF Coating custom valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pres... |
Похожие товары
 |
RV-02 AC Electric Power Source Air Blower Cost-Effective Pressure Relief Valve | Продавец: Greentech Industry (Jinan) Co., Ltd | RV-02A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle... |
 |
RV-01A High-Pressure Aluminium for Aquaculture Environmental Protection OEM | Продавец: Greentech Industry (Jinan) Co., Ltd | RV-01A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle... |
 |
200WOG Thread Globe Valve | Продавец: Wenzhou Chenyu Valve Co., Ltd | 200WOG Thread Globe Valveis a type of valve designed to regulate or isolate the flow of liquids o... |
 |
Forged Steel Gate Valve | Продавец: Wenzhou Chenyu Valve Co., Ltd | Forged Steel Gate Valveis a robust and high-performance type ofGate Valveprimarily used for relia... |
 |
RV-01A High-Pressure Aluminium for Aquaculture Environmental Protection OEM | Продавец: Greentech International (Zhangqiu) Co., Ltd | RV-01A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle... |
