Triple Offset Butterfly Valve

• 

Here is the china double eccentric butterfly valve.To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage, rubber seal must be used, but not high-temperature resistant. In order to overcome the contradiction of the double eccentric butterfly valve,the triple offset butterfly valve was carried out.

The structural characteristics of the double eccentric eccentric axis of the stem position at the same time, make the butterfly plate type sealing face of the cone axis deflection in the cylindrical axis of ontology, that is to say, after the triple eccentric, butterfly plate sealing section is no longer true circle, but the ellipse, and so the seal face shape asymmetry, tilt to the center line of the ontology, on the other side is parallel to the centerline of ontology. The biggest characteristic of the triple eccentric is fundamentally changed the seal structure and seal position is no longer, but the torque seal, namely not rely on the elastic deformation of the seat, but completely rely on the seat of the contact pressure to achieve sealing effect, thus solved the problem of metal seated zero leakage at a stroke, and because of the contact pressure and the medium is proportional to the pressure, resistance to high pressure high temperature is solved. Are abundant as producers oftriple offset butterfly valve,our valves service life is long, the key is the beginning of the material and material technology progress, many newhigh-performance materials developed in recent years, also appeared many casting, welding, spray welding, painting, such as molding, sintering, composite and surface treatment of new technology and new technology and equipment. Paying attention to the information about material science and applying it to the valve in time is an important technical way to develop high performance and high parameter valve.And higer-quality double eccentric butterfly valve chinacan be offered.

Другие товары поставщика

	Wafer Check Valve	What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possi...
	Foot Valve	Basic information This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water so...
	Electric Ball Valve	Description of Electric Ball Valve:ZECOelectric ball valveis named after the combination of electric actuator and ball valve. It is usually used in...
	Pneumatic Ball Valve	As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan...
	Hydraulic Non-Slam Check Valve	Basic Information of Hydraulic Non-Slam Check Valve This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet ef...

Похожие товары

	Клапан	Продавец: RongTengXinNuo(Tianjin) International Trade Co.,Ltd	Клапан
	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...