API Flange Stainless Steel Globe Valve

• 

Introduction toGlobe Control Valve

The is a compulsory sealed valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve 6 from below the valve disc, the resistance to be overcome by the operating force is the frictional force of the valve stem and the packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve. The diameter of the stem must be large, otherwise, the failure of the valve top bend will occur. In recent years, since the emergence of self-sealing valves, the medium flow direction of theglobe control valvehas changed from above the valve disc into the valve cavity. At this time, under the action of the medium pressure, the force to close the valve is small, and the force to open the valve is large. The diameter of the rod can be reduced accordingly. At the same time, this type of valve is also tight under the action of the medium. China's valvehas stipulated that the flow direction of the globe control valvewill be used from top to bottom.

When theglobe control valveis opened, when the opening height of the valve disc is 25% to 30% of the nominal diameter, the flow has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the fully open position of the shut-off valve should be determined by the stroke of the valve disc. This type of valve should generally be installed horizontally in the pipeline.

Globe control valve advantages:

Disadvantages of :

The type of is divided into external thread type and internal thread type according to the position of the stem thread. According to the flow direction of the medium, there are straight-through, direct-current and angular. The shut-off valve is divided into sealing forms, and it has a packing-sealed shut-off valve and a bellows-sealed shut-off valve.

Structure of the globe control valve:

The structure of thebody has straight-through, DC and right-angle. Straight-through is the most common structure, but its fluid resistance is greatest. DC fluid has low resistance and is mostly used for fluids with solid particles or high viscosity. Right-angle valve bodies are mostly forged, which is suitable forflangeglobe valves with the smaller passage and higher pressure.

A globe valve, different from the ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.

Application scope: petroleum chemical industry, electric power, metallurgy, medicine, real estate, municipal engineering, and other industries.

Другие товары поставщика

	FORGED STEEL GATE VALVE	FORGED STEEL GATE VALVE Features: Size Range: 1/2" up to 2" Pressure Class Range: 150LB To 2500LB End Connection: NPT,SW ...
	API FLANGE STAINLESS STEEL BALL VALVE	Features: Size Range: 1/2" up to 48" Pressure Range: ANSI 150LB to 2500LB End Connection: BW,RF,RTJ Operate: Lever, Ge...
	API FLANGE STAINLESS STEEL BALL VALVE	API FLANGE STAINLESS STEEL BALL VALVE SPECIFICATIONS Features: Size Range: 1/2" up to 48" Pressure Range: A...
	1-PIECE BALL VALVE	1-PIECE BALL VALVE Features: Size Range: 1/2" up to 4" Pressure Range: 200PSI To 1000PSI End Connection: BSP, BSPT, NPT ...
	DIN FLANGE CAST STEEL GLOBE VALVE	DIN FLANGE CAST STEEL GLOBE VALVE Features: Size Range: 1/2" up to 36" Pressure Range: PN16 To PN63 End Connection: BW,RF ...

Похожие товары

	Клапан	Продавец: RongTengXinNuo(Tianjin) International Trade Co.,Ltd	Клапан
	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...