.

Hydraulic Non-Slam Check Valve

Basic Information of Hydraulic Non-Slam Check Valve

This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet effect. downloadDof960 series of cases

Features of Hydraulic Non-Slam Check Valve

  1. 2. Automatic control using medium energy;3. Prevent water hammer phenomenon;4. Slowly-closing silencing.Principle of Hydraulic Non-Slam Check Valve

When the pipe supplies water from the inlet end of the valve, the water from the needle valveand one-way valve enters the valvecover control room and then is discharged downstream through the ball valve. Due to the small opening of the needle valve, the discharge speed of the control room is greater than that of the inlet to replenish water, thus reducing the pressure in the control room. The inlet pressure acting under the main valve disc all the time lifts the main valve disc, thereby opening the main valve disc and supplying water downstream. When the pipeline stops supplying water, the downstream water begins to flow back. Due to the effect of the one-way valve, the backflow water cannot flow out after entering the valve cover control room through the ball valve. As a result, the pressure of the valve cover control room increases gradually and the main valve disc is closed tightly.

Installation and Commissioning of Hydraulic Non-Slam Check Valve

Needle valve and ball valve adjust together to get the best opening or closing speed. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Bonnet

Ductile Iron

EN 1563/DIN 1693

Trim

Stainless Steel 431

EN10088-1/ASTM A959

Seat

Stainless Steel 431

EN10088-1/ASTM A959

Diaphragm

EPDM / NBR

ISO 4633

Pilot Valve

Stainless Steel 431

EN10088-1/ASTM A959

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope , Standards & Materials of Hydraulic Non-Slam Check Valve

Size Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2

Zhengfeng Valve Group Co., Ltd. is a professionalnon slam check valve suppliers, hydraulic check valve manufacturersand non slam check valve manufacturer. We provide Control Valve, Balancing Valve, check valve china, anti slam check valve, non slam swing check valve, wafer type non slam check valveand so on. Want to know about non slam check valve meaning? Please contact us.


Отправить запрос, связаться с поставщиком

Кому: ZhengFeng Valve Group
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Pneumatic Butterfly Valve
Pneumatic Butterfly Valve As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan...
Pump Control Valve
Pump Control Valve Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small flui...
Pressure Relief Valve
Pressure Relief Valve This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline ex...
6 Inch Butterfly Valve
6 Inch Butterfly Valve Description of 6 Inch Butterfly Valve: ZECO provides detailed installation instructions to ensure high performance and long service life of the 6 w...
Balancing Valve
Balancing Valve ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y...
Все товары поставщика

Похожие товары

Corrosion-Resistant Pneumatic Insulated Ball Valve
Corrosion-Resistant Pneumatic Insulated Ball Valve Продавец: 869388 Zhejiang Wisley Automatic Valve Co., Ltd. specializes in manufacturing pneumatic valves and indus...
Precision Valve Manufacturing for Energy Infrastructure
Precision Valve Manufacturing for Energy Infrastructure Продавец: Zhejiang Naishi Valve Co. The Forged Steel Trunnion Mounted Ball Valve is designed for high-pressure pipeline applications ...
Greentech New Automatic No Cross Contamination Pneumatic Vacuum Conveyor Sugar Volumetric Rotary Feeder System Material Handling
Greentech New Automatic No Cross Contamination Pneumatic Vacuum Conveyor Sugar Volumetric Rotary Feeder System Material Handling Продавец: Greentech International (Zhangqiu) Co., Ltd Automatic Operation: Ensures continuous and efficient sugar feeding without manual intervention...
Greentech New Industrial Automatic Dilute Phase Pneumatic Conveying System Rotary Valve Roots Blower 220/380V Material Handling
Greentech New Industrial Automatic Dilute Phase Pneumatic Conveying System Rotary Valve Roots Blower 220/380V Material Handling Продавец: Greentech International (Zhangqiu) Co., Ltd Automatic Assembly: Simplifies manual processes with precision and efficiency. Positive Pressu...
RV-02  Pressure Relief Valve
RV-02 Pressure Relief Valve Продавец: Greentech Industry (Jinan) Co., Ltd RV-02A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle...