Wafer Check Valve

What is a Wafer Check Valve?

Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possible back flow within plumbing systems. Wafer check valves are also known as clack valves, reflux valves, non return valves and one way valves. This valve type has been engineered to automatically eliminate the fluid flow reflux that can occur whenever a process system is shutdown. These valves feature a hinged, flap-like disk (the wafer) that is used to allow and restrict liquid flow. This disk only opens in one direction and closes shut under back pressure to seal the valve against opposing fluid flow. Wafer check valves require a minimum amount of system fluid pressure to operate. The check opens whenever upstream pressure is greater than downstream pressure and closes whenever downstream pressure exceeds upstream. Thermoplastic wafer check valves are acceptable for non compressible liquid applications only and should never be used for pneumatic, gas or compressible liquid type scenarios.

Advantages of Wafer Check Valve

ZECO wafer check valve is simple in design because the wafer connection is named and consists of body, disc, spring and shaft pin components. Due to the short closing stroke of the wafer check valve and the quick closing by the spring, the impact on the water hammer can be significantly reduced. The wafer check valve can also be divided into wafer type lifting check valve, wafer type dual plate check valve and wafer type single plate check valve.

High strength

Capitalizing on the stress analysis, they relieve users of any concerns about the strength of resin-made wafer checks.

High corrosion resistance

All components contacting fluid are made of resins. In addition, springs are coated.

Lightweight and compact

Their weights are about one third to one fifth those of metal valves. With small interfaces, they facilitate piping work.

Cost reduction

No gaskets are needed when piping. With integrated stoppers, they help reduce costs.

Wafer Check Valve & Flange Check Valve, Which is better?

Wafer check valves use a swinging disc to allow or block flow. Their design allows them to be fitted in extremely tight spaces – where the flanged check valve can not be used. The wafer check valves have molded bodies around the area where the disc opens up. This is the most important difference between the above two types of valve.

While at first glance this may just seem like a space issue, the presence of a valve body as opposed to the bare bones wafer check actually makes a big difference in the functionality of the valve. Because flanged check valves are flanged in place, there isn’t much room for the disc to open in the pipe line. That means flow is often restricted within the check valve.

Wafer check valves on the contrary have a molded body that creates room for the disc to swing open fully, thus allowing full flow. As you can imagine, this is very important if your application requires full flow. For this reason, we usually offer wafer check valves for applications where flow is not an issue, and swing check valves when a full port valve is required.

Wafer Check Valve for Sale

Wafer Dual Plate Check Valve The structure of ZECO wafer dual plate check valve is that the disc is along with the pin at the center position of the body to swing, short structure dimensions, small volume.

Wafer Type Nrv Wafer type NRV has a shorter face-to-face dimension and dual plate design, the end connection options include wafer type, lug type and double-flange type, and are available in size from 2 to 60 and in pressure ratings from ASME class 150 through 2500.

Specifications of Wafer Check Valves

Size Range	1″ to 60″ (25mm to 1500mm)
Temperature Range	Cryogenic to High Temperature (Pending Model Selected)
Maximum Allowable Operating Pressure	API 594 (150, 300, 600, 900, 1500, 2500)ASME (125, 150, 300)PN (10, 16, 25, 40)
Shutoff Rating	Zero Leakage
Body Materials	ASTM A 126 CLB, ASTM A 395, ASTM A 216 WCB, ASTM A 351 CF8M, Titanium
Seat Materials	BUNA-N, EPDM, A240 – 304 (Inserted or Integral), PFTE, Viton
Disc Material	SS316 as standard (or Higher Grade)
Body Style	Wafer, Flanged, RTJ
Design Standard	API 594, ASME B16.34
Face to Face	ANSI, API 594
Testing Standard	API 598, ASME B16.34

Buy Featured Wafer Check Valve from ZECO Valve

When ZECO helps users to choose the wafer check valve for pipelines, it will give the corresponding scheme. The wafer check valve is usually installed in the pipeline that may produce a water hammer. Because of its structural characteristics, the wafer check valve can effectively eliminate the water hammer generated by the counterflow of medium. Another feature of the wafer check valve is that it does not need flange connection, saving installation space. It only needs to be installed in the middle of two pipe flanges, and then fixed with bolts.

ZECO Valve Chinais specialized in the wafer check valve manufacturers and carries on the design and production strictly in accordance with API 594 standard, the size range of products made from 1/2 “to 88”, nominal pressure from 150 lb to 2500 lb. Main valve material includes carbon steel, low-temperature steel, dual-phase steel, titanium alloy, aluminum bronze, Inconel, Monel alloy and other metal materials, products widely used in oil and gas, in the field of global energy, chemical and other industries.

If you want to know more about wafer type check valve price, please contact us.

As one of china check valve manufacturers, we will provide more types of high quality products for sale, if you are interested, please leave us a message.

Другие товары поставщика

	Pneumatic Ball Valve	As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan...
	6 Inch Ball Valve	Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been p...
	3 inch Butterfly Valve	Categories: Butterfly Valve, Butterfly Valve By Inch Tags: Butterfly Valve Wafer Type, Wafer Type Butterfly Valve What is 3 Inch Wafer Type But...
	Backflow Preventers	Basic informationof the fire protection butterfly valvesThisfire protection butterfly valvecan be used to cut off, switch on and adjust the medium ...
	4 Inch Butterfly Valve	Description of 4 Inch Butterfly Valve: ZECO 4 flanged butterfly valveis made of body, disc, stem, seat, stuffing box, gear etc. ZECO butterfly valv...

Все товары поставщика

Похожие товары

	China Full Welded Ball Valve	Продавец: Utmost flow control technology Co., Ltd	China Full Welded Ball Valve Since the full welded ball valveseat is composed of a carbonized Te...
	China Fluorine Lined Butterfly Valve	Продавец: Utmost flow control technology Co., Ltd	China Fluorine Lined Butterfly Valve In the well-known butterfly valve technology, fluorine line...
	China Floating Ball Valve	Продавец: Utmost flow control technology Co., Ltd	China Floating Ball Valve UTMOST, a floating ball valve factory, floating ball valve supplier, f...
	Eccentric Rotary Plug Control Valve	Продавец: Utmost flow control technology Co., Ltd	Series C/D China Eccentric Rotary PlugControl Valve UTMOST eccentric rotary disc valvehas the o...
	China Eccentric Butterfly Valve	Продавец: Utmost flow control technology Co., Ltd	China Eccentric Butterfly Valve In contrast with the concentric butterfly valve, a butterfly val...