Automatic Down Filling Tester

• 

Introduction to the Automatic Down Filling Tester

The loftiness index is one of the important indicators of feather and down quality. It is a concentrated manifestation of the internal quality in terms of elasticity and thermal insulation performance.

At the same time, it also indirectly reflects the degree of dispersion of the various components of feathers and down. Loftiness testing is an important part of down testing.

It refers to the elasticity of down (feathers), which is obtained by measuring the volume occupied by a certain amount of sample down (feathers) under a constant weight pressure in a container with a certain caliber. Since the greater the loftiness, the greater the amount of static air contained, and the static air layer is a good thermal insulation layer, there is a good linear relationship between the loftiness of down and the thermal insulation performance of down products.

Technical Parameters of the Automatic Down Filling Tester

• Control System: PLC
• Operating Interface: Color 7-inch touch screen, with Chinese and English switching
• Measuring Cylinder:
• Diameter (large cylinder): 288 mm; (small cylinder): 244 mm
• Cylinder Height: 500 mm
• Cylinder Material: Acrylic
• Sample Filling Amount: CEN 20 g; DIN EN 12130 20 g; USA 30 g; JIS 30 g
• Weight Disc:
• Material: PMMA
• Inner diameter (large cylinder): 284 mm; (small cylinder): 239 mm
• Load Weight: European and American standards (*** & ASTM) 94.5 g; Japanese standard (JIS) 120 g
• Pressure:
• European and American standards (*** & ASTM): 0.14878 g/cm³
• Japanese standard (JIS): 0.188 g/cm³
• Air Volume for Fluffing the Sample: 30 L
• Hanging Rod of the Pressing Disc: Soft
• Descending Speed When the Test Program Encounters Down Feathers: Less than 0.3 m/min
• Overall Dimensions: 760 * 480 * 1480 mm
• Total Weight of the Machine: 69 kg

Standards Applicable to the Automatic Down Filling Tester

IDFB－FP, BSEN12130, GB/T10288, FZ/T80001, GB/T14272, GB/T12705.2, FTMS191A, JISL 1903, etc.

Другие товары поставщика

	Tester for Safety Helmets Against Molten Metal Splashing	Tester for Safety Helmets Against Molten Metal Splashing - Flammability Testing equipment price quotation - standard Standards: GB/T2812 - XXXX...
	Fabric Bursting Strength Tester	Standards: ASTM 3786-06、ISO 2758、ISO 13938-2、BS 3424 BS 3137、BS 4768、AS 2001.2.4、GB/T 7742 IWSTM 29、EDA NA 80.4-02、EDA NA 80.3-99、BS 2922 FZ/T 6...
	Rubber Din Abrasion Tester	Standards: DIN 53516, JIS K6369 ，GB/T 20991，GB 20265-2006，GB20266-2006，SATRA TM174，BS 903，JIS K6264，GB/T9867，ISO4649 Applications: Din rub...
	Hydrostatic Head Test Machine	Standards: AATCC 127 Water Resistance: Hydrostatic Pressure Test ASTM F1670 Standard Test Method for Resistance of Materials Used in Protective ...
	Small Parts Tester	Test Procedure: 1. Place test object under its own weight into the small parts tester in multiple orientations. 2. If the object fully submerges ...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...