Hydraulic Oil Precision Filter Tester

1.Conformity standard:

GJB420. NAS1638. ISO4406. 18/16/13

2.Characteristics and Applications

2.1 Features of oil filter:

● Specialized gear pump set with low noise, strong self-priming ability and smooth operation.

● The high pressure pipeline is equipped with overflow protection device, which can effectively protect the safety of the hydraulic system.

● The coarse filter at the suction port protects the oil pump and extends the service life of the main filter.

● The fine filter can be selected with different precision according to the different needs of users to achieve the required results.

● The panel is equipped with a pressure gauge, which continuously indicates the operating condition of the system and the degree of contamination of the filter element during operation. There are differential pressure transmitters on the pre-filter and fine filter to indicate the system cartridge at any time.

2.2 Application of oil filtering machine:

Filtration of hydraulic lubrication system during refueling.

● Bypass filtration of hydraulic lubrication system during operation.

● Circulation filtration of hydraulic lubrication system before operation.

● Hydraulic lubrication system oil is not filtered and pumped out by the pump of the equipment itself.

(Note: This machine is not applicable to flammable and explosive media such as fuel oil.)

3. Technical Parameters:

Working Pressure: 0.6MPa

Differential Pressure for Alarm: 0.2MPa

Flow Rate: 50±5L/min

Medium: ≤160mm/s (20℃)

Accuracy: 5μm

Rated Power: 2.2KW

Power Supply Voltage: 3-phase 380V

Frequency: 50Hz

Operating temperature: 20 ℃ - 70 ℃

4. Cleaning and replacement of the filter:

When the oil filter works for a period of time, the oil filter oil system pressure increases accordingly, the performance of its components have different effects, especially on the filter precision of the filter element of the shadow

core damage, the main reason for this is that the filter element of the differential pressure rises, the need to replace the filter element. Specific cleaning and replacement methods are as follows:

4.1 Cleaning: (only on the pump before the suction oil filter)

4.1.1 Cleaning cycle: oil filter continuous work for a week (about 150 hours)

a. Unscrew the top cover of the oil suction filter and take out the filter element.

b.Cleaning the filter element:When cleaning the filter element, soak it with gasoline for about half an hour and then remove the impurities with a brush.

4.2 Replacement

4.2.1. Conditions for replacement: When the oil filter is filtering, when the red indicator pops up on the differential pressure alarm installed on the pre-filter and fine filter, the cartridge needs to be

4.2.2 Replacement method: loosen the four bolts on the upper cover of the pre-filter and fine filter, remove the upper cover, take out and replace the filter element.

5.Precautions

5.1 The oil filter can not filter gasoline and other flammable liquids.

5.2 If the oil pool (or tank) of the oil is too dirty and there may be large obstacles, in the suction port should be installed on the large mesh filter protection.

5.3 The oil suction and discharge pipes should be kept clean.

Другие товары поставщика

	Solid Auto - ignition Point Tester/ Solid Material Autoignition Tester/ Self-Ignition Point Tester	Product Introduction This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - s...
	Paper quantitative tester	Paper dust meter - Other test instrument - standard Product Introduction: The circular square quantitative sampler （referred to as quantitative s...
	Dust Filter Efficiency Test System	Dust Filter Efficiency Test System - Filter material testing instruments price and quotation - standard Standards: 1. ASTM D6830-02 Standard te...
	Suture Needle Penetration and Bending Strength Tester	Suture Needle Penetration and Bending Strength Tester - Other test instrument - standard Product Information: The Suture Needle Puncture and Bend...
	Differential Scanning Calorimetry Tester	Scope of application: It is used to analyze the thermal effect and corresponding temperature when the physical or chemical properties of organic a...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...