Filter Dynamic Cycling Tester

• 

Production:
Filter element dynamic cycling test bench is mainly used to test the chemical element precipitation characteristics of filter element under long-term dynamic cycling. It adopts touch screen operation mode, combined with PLC control, according to the setting

line, and can analyze and judge the abnormal state in the test process and send out alarm information. Manual interval sampling and analysis.

The test bench consists of four parts: test cycle system, real-time temperature control system, electrical control system and test bench frame.

1. Test circulation system

The test circulation system adopts variable frequency pumping unit, which runs automatically by setting the flow rate. System configuration: a test tank, a set of temperature control system, two sets of independent heaters; a set of bypass net

pressure regulator; a set of agitators.

2. Real-time temperature control system

test bench design heating device to ensure that the temperature requirements of the test system, temperature control range of 80 ± 2 ℃ range.

3. Electrical control system

Electrical control system mainly consists of hardware, software, two major systems, the system hardware are selected from well-known brands in the industry, applicable to a wide range of working conditions, reliable operation. The control mode adopts

PLC control, with good human-computer interaction interface, simple operation, stable operation and many other advantages.

4. Test bench frame

The test bench frame design adopts high-strength industrial aluminum frame structure, which has many advantages such as light weight, high strength and beautiful appearance.

Technical indicators:

1. Test medium: water containing boron, and containing lithium hydroxide

2. Test flow: 2-10 m³/h working point 5.7

3. Rated pressure: 0.8 MPa

4. Test cartridge differential pressure: 0. 4MPa

5. Maximum working temperature: 80 ℃

6. Test tank volume: 2000L

7. Maximum cartridge size: 2.5 inches × 60cm (diameter × height cm) to provide a set of equipment

8. Test bench power: 22kw

9. Test bench power supply: three-phase five-wire AC380V / 50Hz

Другие товары поставщика

	Shoe Lace and Eyelet Abrasion Tester	Main uses: The shoelace eye wear testing machine is mainly used to test the wear resistance of shoelace and shoe eye under repeated friction. The ...
	Photovoltaic module outdoor exposure test system/ photovoltaic weathering station/ IEC 61215 outdoor test system/ Solar panel outdoor exposure testing	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Sa...
	Battery Adiabatic Calorimeter	Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201...
	Hardened Concrete Bubble Spacing Coefficient Analyzer	Hardened Concrete Bubble Spacing Coefficient Analyzer - Other test instrument - standard Standards: DL/T 5150-2001 Test Code for Hydraulic Conc...
	Medical needle toughness tester	Medical needle toughness tester - Other test instrument - standard Product Information: Medical needle injection needle toughness tester using 5....

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...