Cylindrical Battery In-Situ Volume Swelling Testing System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Cylindrical Battery In-Situ Volume Swelling Testing System is designed for real-time measurement and analysis of volume and dimensional changes of cylindrical lithium-ion cells during charge and discharge processes. The system uses non-contact laser displacement technology to accurately capture micro-level swelling behavior under controlled temperature and pressure conditions. It provides reliable data support for safety evaluation, reliability testing, and structural optimization of cylindrical batteries.
Application
(1) In-situ volume swelling analysis of cylindrical lithium-ion batteries during cycling.
(2) Expansion behavior evaluation of 18650, 21700, and similar cylindrical cell formats.
(3) Safety and reliability assessment under fast charge, overcharge, and abuse conditions.
(4) Thermal-mechanical coupling analysis under elevated or low-temperature environments.
(5) Fatigue and pressure response testing during long-term cycling.
(6) R&D validation and quality comparison for different cell designs and materials.
Standards
(1) UL 1642 – Standard for Lithium Batteries.
(2) IEC 62660-2 – Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles – Reliability and Abuse Testing.
(3) ASTM E83 – Verification of Linear Displacement Measuring Systems.
(4) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test (reference method).
(5) CE Certification – Conformité Européenne.
Features
(1) Sub-micron non-contact displacement measurement with laser-based sensors.
(2) High-resolution detection of radial and axial swelling during rapid cycling.
(3) Multi-environment testing with integrated temperature chamber.
(4) Dynamic pressure loading capability for fatigue and structural response testing.
(5) Four-channel parallel testing for improved efficiency and data consistency.
(6) Real-time volumetric strain visualization using structured light scanning.
(7) Automatic thermal drift compensation for long-term stability.
(8) Dual redundant safety protection with emergency stop system.
Parameters
| Parameter | Specification |
|---|---|
| Displacement Range | ±1 mm (linear), ±0.5° (angular) |
| Linear Measurement Accuracy | ±0.1 μm |
| Angular Measurement Accuracy | ±0.01° |
| Displacement Resolution | 0.05 μm |
| Temperature Range | -20°C to 150°C |
| Temperature Ramp Rate | ≤ 2°C/min |
| Pressure Range | 0–30 bar |
| Test Channels | 4 channels |
| Data Acquisition Rate | 5,000 points/s/channel |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (W×D×H) | 600 × 500 × 1000 mm |
| Weight | 150 kg (net) / 180 kg (gross) |
Accessories
(1) Non-magnetic cylindrical battery holders (18650, 21700).
(2) Laser displacement sensor modules.
(3) Structured light scanning unit.
(4) Temperature-controlled environmental chamber.
(5) Data acquisition and analysis software.
(6) NIST-traceable displacement calibration standards.
Test Procedures
(1) Mount the cylindrical battery into the designated non-magnetic holder.
(2) Align the battery position using the laser-guided positioning system.
(3) Set temperature, pressure, and cycling parameters according to test requirements.
(4) Start the charge/discharge process and initiate in-situ displacement monitoring.
(5) Record real-time swelling data and volumetric strain evolution.
(6) Export and analyze test data for safety evaluation and performance assessment.
Maintenance Information
(1) Periodically calibrate laser displacement sensors using certified standards.
(2) Inspect battery holders and mechanical fixtures for wear or deformation.
(3) Clean optical components to maintain measurement accuracy.
(4) Verify temperature and pressure control modules at regular intervals.
(5) Perform routine software updates and data backups according to laboratory protocols.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Damp heat test chamber for solar panels IEC standard | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical a... |
 |
Bone Plates Four-point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue ... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simu... |
 |
Face Mask Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, ... |
 |
Automatic catheter vacuum leak apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB 15812.1 - 2005 :Non - Vascular Intravascular Catheters - Part 1: General Perf... |
Похожие товары
 |
Large Naïve VHH Library | Продавец: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Продавец: Коллирон электроникс лимитед | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Продавец: Коллирон электроникс лимитед | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Продавец: Коллирон электроникс лимитед | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Продавец: Коллирон электроникс лимитед | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
