.

Thermal cycle wet freezing testing machine

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • UL 1073: Standard for Safety for Enclosures for Electrical Equipment
  • ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Extreme Environmental Simulation
    • -40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.
    • 98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.
  2. Ultra-Stable Performance
    • ±1°C Temperature Stability: Ensures consistent testing across 1,000+ cycles.
    • ≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.
  3. Rapid Transient Response
    • IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).
    • Auto-Tuning PID: Adapts to payload changes in real-time.
  4. Energy Efficiency
    • 40% Lower Power Consumption: Advanced insulation and heat recovery systems.
    • ECO Mode: Auto-powers down during stabilization phases.
  5. Safety First
    • Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.
    • Door Interlock System: Prevents accidental chamber access during testing.

Product Features

  • Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.
  • 10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.
  • Self-Diagnostics: Real-time sensor health checks and error logging.
  • Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Technical Parameters

ParameterSpecification
Temperature Range -40°C to +85°C (operational)
Temperature Fluctuation ≤±1°C
Temperature Deviation ≤±1°C (at steady state)
Temperature Uniformity ≤±2°C (empty chamber)
Heating Rate 10°C/min (typical, configurable)
Cooling Rate 7°C/min (typical, configurable)
Humidity Range 30%–98% RH (non-condensing)
Humidity Deviation ±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume 500L (standard), expandable to 1,500L
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 1,200mm (W) × 1,800mm (D) × 2,000mm (H)
Weight 800 kg (net) / 1,200 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x universal sample racks (adjustable for batteries/PV modules/PCBAs).
    • 10x humidity sensor calibration capsules.
  2. Software Suite:
    • License key forEnviroTest Pro(Windows/Linux).
    • 1-year free access to cloud-based test report generator.
  3. Calibration & Safety:
    • NIST-traceable temperature/humidity logger.
    • Emergency eyewash station (portable).
  4. Maintenance Kit:
    • Spare heating elements and refrigerant filters.
    • Chamber cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Coatings Shear Fatigue Tester
Coatings Shear Fatigue Tester Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc...
Paper ring compression strength tester
Paper ring compression strength tester Product Introduction: Intelligent cardboard edge compression strength tester, also known as computer measurement and control compression tester, c...
Strip evenness tester
Strip evenness tester Product Introduction: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to...
Zipper Fatigue Tester
Zipper Fatigue Tester Product Introduction: The functional life of a zipper is often determined by its ability to withstand numerous opening and closing cycles without ...
Geosynthetic Transmissivity Tester
Geosynthetic Transmissivity Tester Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
Все товары поставщика

Похожие товары

Full-Body Garment Stress Tester,FZ/T 70015
Full-Body Garment Stress Tester,FZ/T 70015 Продавец: Standard International Group (HK) Limited TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
Industrial Dry Cleaning Machine,industrial garment steamer
Industrial Dry Cleaning Machine,industrial garment steamer Продавец: Standard International Group (HK) Limited TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
MST Medical Compression Stocking Tester,compression sock tester
MST Medical Compression Stocking Tester,compression sock tester Продавец: Standard International Group (HK) Limited The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool Продавец: Standard International Group (HK) Limited Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
Dental material color stability tester
Dental material color stability tester Продавец: Standard International Group (HK) Limited Application The applications of color stability testers for dental materials are mainly reflecte...