.

Thermal cycle wet freezing testing machine

Thermal cycle wet freezing testing machine
  • Thermal cycle wet freezing testing machine
Produced by: Qinsun Instruments Co., LTD

All supplier products
Send product request

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • UL 1073: Standard for Safety for Enclosures for Electrical Equipment
  • ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
  • CE Certification(Conformité Européenne)

Product Advantages

  1. Extreme Environmental Simulation
    • -40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.
    • 98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.
  2. Ultra-Stable Performance
    • ±1°C Temperature Stability: Ensures consistent testing across 1,000+ cycles.
    • ≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.
  3. Rapid Transient Response
    • IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).
    • Auto-Tuning PID: Adapts to payload changes in real-time.
  4. Energy Efficiency
    • 40% Lower Power Consumption: Advanced insulation and heat recovery systems.
    • ECO Mode: Auto-powers down during stabilization phases.
  5. Safety First
    • Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.
    • Door Interlock System: Prevents accidental chamber access during testing.

Product Features

  • Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.
  • 10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.
  • Self-Diagnostics: Real-time sensor health checks and error logging.
  • Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.

Technical Parameters

ParameterSpecification
Temperature Range -40°C to +85°C (operational)
Temperature Fluctuation ≤±1°C
Temperature Deviation ≤±1°C (at steady state)
Temperature Uniformity ≤±2°C (empty chamber)
Heating Rate 10°C/min (typical, configurable)
Cooling Rate 7°C/min (typical, configurable)
Humidity Range 30%–98% RH (non-condensing)
Humidity Deviation ±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume 500L (standard), expandable to 1,500L
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 1,200mm (W) × 1,800mm (D) × 2,000mm (H)
Weight 800 kg (net) / 1,200 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x universal sample racks (adjustable for batteries/PV modules/PCBAs).
    • 10x humidity sensor calibration capsules.
  2. Software Suite:
    • License key forEnviroTest Pro(Windows/Linux).
    • 1-year free access to cloud-based test report generator.
  3. Calibration & Safety:
    • NIST-traceable temperature/humidity logger.
    • Emergency eyewash station (portable).
  4. Maintenance Kit:
    • Spare heating elements and refrigerant filters.
    • Chamber cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Thrust Bearing Rolling Friction and Wear Testing Machine
 Thrust Bearing Rolling Friction and Wear Testing Machine Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under cont...
Adiabatic Self - Accelerating Decomposition Temperature Tester
 Adiabatic Self - Accelerating Decomposition Temperature Tester Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H...
Helmets Designated Protection Areas Tester
 Helmets Designated Protection Areas Tester Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t...
Thermal cycle wet freezing test device
 Thermal cycle wet freezing test device Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu...
Carpet Abrasion Resistance Testing machine
 Carpet Abrasion Resistance Testing machine Standard ASTM D4157(Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)) ISO 12947-2(Textiles - Deter...
All supplier products

Same products

Full-Body Garment Stress Tester,FZ/T 70015
 Full-Body Garment Stress Tester,FZ/T 70015 Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
Industrial Dry Cleaning Machine,industrial garment steamer
 Industrial Dry Cleaning Machine,industrial garment steamer Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
MST Medical Compression Stocking Tester,compression sock tester
 MST Medical Compression Stocking Tester,compression sock tester Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool
 MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
Dental material color stability tester
 Dental material color stability tester Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...