Microbial Barrier Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting performance of the contact wound materials claimed to have bacteria-inhibiting performance. The bacteria-inhibiting test device can simultaneously meet the four test methods of wet bacteria-inhibiting, dry bacteria-inhibiting, semi-wet (dry outside and wet inside) bacteria-inhibiting, and semi-wet (wet outside and dry inside) bacteria-inhibiting.

Standard:

EN 15194:Cycles - Electrically power assisted cycles - EPAC Bicycles

ISO 4210:Cycles - Safety requirements for bicycles

UL 2849:Standard for Electric Bicycles and Electric Scoooters

ECE R50:Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for vehicles of category L

Principle:

The sample was placed between two collets of a hemispherical glassware, a certain amount of standard bacterial solution was added to one side of the ware, and liquid medium was added to the other side, and the turbidity in the liquid medium was checked after a certain period of time

Or scrape the liquid to check for bacterial growth.

Advantages:

Ensures compliance with critical safety and performance standards for e-bike lighting.

Provides accurate and repeatable measurements of photometric and electrical parameters.

Allows for comprehensive evaluation of light distribution and beam patterns.

Facilitates durability testing under simulated environmental and mechanical stresses.

Supports efficient research and development of innovative and reliable lighting solutions.

Contributes to enhanced rider safety and visibility in various conditions.

Helps in meeting regulatory requirements for market access and product certification.

Features:

Goniophotometer: A precise instrument for measuring light intensity distribution in 3D space, essential for analyzing beam patterns and obtaining luminous intensity data.

Integrating Sphere: Used for measuring total luminous flux (lumens) and other integral photometric quantities, often with a spectroradiometer for color properties.

Photometers/Lux Meters: High-accuracy instruments for measuring illuminance at specific points or areas.

Programmable DC Power Supply: To provide stable and controllable power to the e-bike lighting device, simulating various battery conditions.

Electrical Measurement Unit: For measuring voltage, current, power consumption, and electrical efficiency of the lighting device.

Environmental Test Chambers: Chambers for simulating conditions such as extreme temperature, humidity, thermal shock, and salt spray.

Dust and Water Ingress Test Chambers: To evaluate the lighting device's IP (Ingress Protection) rating (e.g., IP6X, IPX7).

Vibration and Shock Test Systems: To assess the mechanical robustness and durability of the lighting device under typical e-bike operating conditions.

Control Software and Data Acquisition: Comprehensive software for automating test procedures, collecting data, analyzing results, and generating reports.

Fixture and Mounting: Adjustable fixtures to securely mount various types and sizes of e-bike lighting devices for testing.

Parameters

Description	Details
Vibration type	Pneumatic ball vibrator
Vibration frequency	20.800 times/min
Vibration force	650N
Worktable dimensions	40cm × 40cm × 10mm
Worktable material	Marble slab
Experimental container	Stainless steel experimental container
Number of working positions	6
Cabinet negative pressure range	-50 Pa to -200 Pa
High-efficiency filter filtration efficiency	Better than 99.99%
Negative pressure cabinet ventilation flow rate	≥5m³/min
Data storage capacity	100.000 sets
Operating voltage	220V 50HZ

Accessoriess

Two hemispherical glass devices,

two glass plugs,

two gooseneck glass tubes.

Test Procedures

Materials Preparation: Select suitable breathable packaging materials for testing.

Generation of Microbial Aerosols: Use an aerosol generator to produce microbial aerosols of a specific concentration.

Material Testing: Place the breathable packaging material to be tested into the testing apparatus, allowing the microbial aerosol to pass through the material.

Sampling: Use a six-channel filtration sampling device to simultaneously collect microbial samples from both the sample group and the control group.

Results Analysis: Evaluate the microbial barrier performance of the breathable packaging material by comparing the sampling results of the two groups.

Другие товары поставщика

	ISO 16890 filter media testing equipment manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Filter Media Test Rig is designed for characterization of filter media an...
	Lithium Battery Thermal Runaway Gas Analysis Equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The In-situ Gas Analysis System for Lithium Battery Thermal Runaway is an adv...
	Xenon Arc Exposure Apparatus	Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.The spectra of the xenon arc lamp and sunlight are highly conver...
	Custom Negative pressure tester for medical syringes	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Syringe Sealing Negative Pressure Tester is a precision instrument design...
	Vacuum Blood Collection Tube Suction Volume Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The main uses, compliance standards, and technical parameters of the Vacuum Blood Collectio...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...