Melt Index Tester

The Melt Index Tester (Melt Flow Rate Meter) is a precision instrument for evaluating the flow properties of thermoplastic materials under specified conditions. By automatically extruding polymer melts through a standardized die and measuring the mass or volume flow, it determines the Melt Flow Rate (MFR), providing critical information on polymer processability, molecular weight, and quality control. The instrument supports both manual and automated testing, with accurate temperature control and built-in data output.

Application

(1) Measurement of melt flow properties for engineering plastics including fluoroplastics, nylon, and polyoxymethylene (POM).

(2) Testing low-melting-point thermoplastics such as polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS resin, and polycarbonate.

(3) Quality control in plastic production and manufacturing to ensure consistent polymer performance.

(4) Research and development of new polymer formulations and compounding.

(5) Petrochemical industry applications for raw material evaluation.

(6) Educational and research laboratories in colleges and universities for polymer science studies.

(7) Commodity inspection and testing institutions for certification and compliance testing.

Standards

(1) ISO 1133 – Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.

(2) ASTM D1238 – Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer.

(3) GB/T 3682 – Plastics – Determination of the melt flow rate (MFR).

(4) JIS K7210 – Japanese Industrial Standard for measurement of thermoplastic melt index.

(5) Additional industry-relevant ISO and ASTM standards for polymer characterization and processability assessment.

Features

(1) Rapid heating with minimal temperature overshoot for consistent test conditions.

(2) High-accuracy PID temperature control (±0.1°C) with over-temperature protection.

(3) Automatic recovery to constant temperature after sample loading.

(4) Supports both manual and automatic cutting methods for test sample extrusion.

(5) Built-in Chinese LCD display with intuitive interface.

(6) Integrated printer for automatic result output.

(7) Reliable, stable operation with precise, repeatable measurements.

Parameters

Parameter	Specification
Temperature Control	50–450°C, PID control, accuracy ±0.1°C (with over-temp protection)
Weights	1200g, 2160g, 3800g, 5000g, 10000g
Automatic Cropping Device	Automatic and manual operation (optional)
Time Setting	0.1–999.9 min, arbitrary setting
Cylinder Diameter	9.5504 ± 0.0076 mm
Plunger Diameter	9.4742 ± 0.0076 mm
Die/Thin Hole Pattern	External diameter 9.5 ± 0.02 mm, bore 2.0955 ± 0.0051 mm, length 8.00 ± 0.02 mm
Machine Size (L×W×H)	36 × 51 × 60 cm
Machine Weight	40 kg (excluding weights)
Power Supply	AC 220V, 5A

Accessories

(1) Mercurial thermometers (150°C, 200°C, 250°C, 300°C optional).

(2) Cleaning brush and scraper.

(3) Guide material stick.

(4) Observation mirror.

(5) Feedstock funnel.

(6) Three frictioning steel discs.

(7) Two thin hole pattern determination gauges.

Test Procedures

(1) Preheat the cylinder to the required test temperature.

(2) Load the polymer sample into the cylinder and allow it to reach thermal equilibrium.

(3) Apply the specified weight on the plunger for extrusion.

(4) Start the automatic or manual cutting mechanism as per the test method.

(5) Measure the mass or volume of extruded polymer in the defined time interval.

(6) Record results and calculate the Melt Flow Rate (MFR) according to standard formulas.

(7) Repeat tests as needed for multiple samples or repeatability verification.

Maintenance Information

(1) Keep cylinder, plunger, and die clean after each test to prevent residue build-up.

(2) Calibrate weights and temperature sensors periodically.

(3) Inspect cutting mechanism and lubricate moving parts regularly.

(4) Store instrument in a dry, stable environment to prevent corrosion.

(5) Check printer and display functionality before daily operation.

Другие товары поставщика

	Athletic Footwear Shock Attenuating Tester	The Athletic Footwear Shock Attenuating Tester is primarily used to test the shock energy absorption performance of single materials or material st...
	Full Vehicle Environmental Performance Test Chamber, ISO 12219	Full Vehicle Environmental Performance Test Chamber is a specialized facility designed for comprehensive testing of gasoline and electric vehicles ...
	Enamel Boiling Water Resistance Tester	The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical attack resistance of enamel coatings under boiling water conditions...
	Protective Clothing Liquid Static Pressure Tester	Standards GB24540-2009，LFY-252 Instrument use The acid-proof clothing material anti-seepage acid static acid pressure tester is used to measure ...
	Rubber Sleeve Rebound Tester	The Rubber Sleeve Rebound Tester is designed to evaluate the resilience and compression performance of collection needle rubber sleeves. It measure...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...