Building material burning performance tester

• 

According to GB / T8626. ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.

Building material burning performance testing machine meet the standards: EN ISO 11925-2. DIN 53438. DIN4102-1. GB / T 8626 and other standards.

Technical parameters:

1. stainless steel structure box;

2. the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;

3. the flame height adjustable, automatic ignition;

4. the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;

5. gas pressure: 10KPa-50 KPa;

6. burning angle: 0 ° (vertical), 45 °

7. through the chassis outside the debug handle, the burner can move in the horizontal direction;

8. tempered glass door easy to observe the test;

9. stainless steel sample holder and sample template;

10. equipped with two kinds of stainless steel sample clip.Flame height gauge;

11. a high degree of experimental automation, experimental data accurate, easy to operate;

Control system:

1. programmable controller (PLC) control:

2. automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;

3. optional automatic detection of wind speed, 6 samples of experimental data preservation;

4. the text display display;

5. real-time monitoring of experimental data, query 6 experimental data, query the alarm content.

6. the experimental abnormal sound alarm.

Другие товары поставщика

	Full Notch Creep Tester	This testing machine is used to test the environmental stress cracking performance of plastic materials. The equipment features touchscreen operati...
	Single Burning Item，test apparatus， BS EN 13823	Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions....
	Intervertebral Fusion Cages Torsion Fatigue Tester	Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency...
	Infusion Pump Flow Rate Tester	The Infusion Pump Flow Rate Tester is specifically designed for testing the flow rate of sodium chloride solution in infusion sets. It is suitable ...
	Bone Cement Four-Point Bending Fatigue Tester	Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. ISO ...

Похожие товары

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Продавец: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Продавец: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Продавец: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Продавец: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Продавец: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...