Flammabillity Test Machine,BSS 7230 ,FAA.FAR.25.853

• 

Introduction

The product is according to aviation standards FAR-25 Appendix F of the first part b (4), b (6), b (7) Equipment integrated appendix F the first part b4 vertical combustion and b 6 45 ° and 60 ° b7 item combustion demand for housing and design ;And b2 is the request of the sample holder and customized for various experiment using the sample holder and corresponding independent test procedure; This product with touch screen control system and PLC, can make the experiment more automaticly and easier to extract data; and provide the combustion at the angle of 90°, and 45 °, 60 ° with independent test procedures; Model: FTech-BSS 7230

Standard

CCAR-25 Appendix F of the first part of b 4 and 6.7 items Reference: GB / T 5455 vertical flame test FAA.FAR.25.853 American Airlines management organized - transport aircraft - cabin interior of standards

Main feature

1.The tank is painted and equipped with viewing window;

2. The chamber dimensions: 720mm x 450mm x 800mm;

3. The automatically electronic ignition;

4. Ignition timing can be arbitrarily set around 0 ~ 99.99 seconds, continued burning time and flame time can be automatically recorded and digitally displayed;

5. The flame height can be adjusted;

6. The "push-pull" fixture;

7. The burner is located at the sliding track, easily operated, when pushed to the combustion position, automatic timing.

8. Pin valve can precisely control the gas flow and adjust standard flame height around 38.1mm;

9. According to the test samples, multiple samples holder can be chosen.

10. Brand pressure gauge and pressure regulator can accurately adjust the gas pressure;

11. Bunsen burner tube inner diameter is 9.5mm; the bottom of sample must be higher than the light of 19.1mm

12 .Thermocouple can test the maximum flame temperature about 1000 ºC; flame kerne temperature must be higher than 843 ºC

13.The ignition time can be set freely and the buzzer can remind people when the time is over;

14. PLC microcomputer control system with touch screen can make the experimental process more automaticly and the data can be automatically recorded and stored;

Technical Specifications

1. The ignition timing: 0 to 99.99 seconds set arbitrarily;

2. Afterflame time and antiflaming time recorder: 0 ~ 99.99 seconds, accuracy: ± 0.01 seconds;

3. The flame height measuring device: flame height ruler is about 38.1mm;

4. The gas: methane, propane or butane or liquefied petroleum gas or other flammable gases

5. The power supply: AC220V, 50Hz, 50W

6. Weight: about 70kg

Другие товары поставщика

	Whole shoe breathability and heat preservation testing machine	Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athlet...
	Light Fastness Test Instrument	Features and Benefits 1.The lightfastness test instrumentusexenon arc lamp as a radiation source, the visible light range emitted is 380nm-750nm, ...
	Falling ball impact testing machine	Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material...
	Tensile and Shear Tester STD - FB1 - A	The Tensile and Shear Tester analyzes hand movements-referred to as "tensile"and "shear"-performed by artisans and professionals when judging a fab...
	Intervertebral Fusion Cages Shear Fatigue Tester	Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, an...

Похожие товары

	Lithium battery explosion test chamber,IEC 60086,UL 913	Продавец: Standard International Group (HK) Limited	Lithium battery combustion and explosion experiment chamber is mainly used for thermal runaway co...
	STD Lithium battery explosion test chamber,Testing Machine	Продавец: Standard International Group (HK) Limited	Introduction Lithium battery combustion and explosion experiment chamber is mainly used for ther...
	GAS Combustion Rate Tester,ISO817,Testing Machine	Продавец: Standard International Group (HK) Limited	Introduction The combustible gas combustion rate tester is developed in accordance with the requ...
	Flammabillity Test Machine,BSS 7230 ,FAA.FAR.25.853	Продавец: Standard International Group (HK) Limited	Introduction The product is according to aviation standards FAR-25 Appendix F of the first part ...
	Smoke Density Chamber (Horizontal Test),Smoke density evaluation device,ISO 5659	Продавец: Standard International Group (HK) Limited	The main principle is to measure smoke density in a particular space, cable or material produced ...