Flammabillity Test Machine,BSS 7230 ,FAA.FAR.25.853

• 

Introduction

The product is according to aviation standards FAR-25 Appendix F of the first part b (4), b (6), b (7) Equipment integrated appendix F the first part b4 vertical combustion and b 6 45 ° and 60 ° b7 item combustion demand for housing and design ;And b2 is the request of the sample holder and customized for various experiment using the sample holder and corresponding independent test procedure; This product with touch screen control system and PLC, can make the experiment more automaticly and easier to extract data; and provide the combustion at the angle of 90°, and 45 °, 60 ° with independent test procedures; Model: FTech-BSS 7230

Standard

CCAR-25 Appendix F of the first part of b 4 and 6.7 items Reference: GB / T 5455 vertical flame test FAA.FAR.25.853 American Airlines management organized - transport aircraft - cabin interior of standards

Main feature

1.The tank is painted and equipped with viewing window;

2. The chamber dimensions: 720mm x 450mm x 800mm;

3. The automatically electronic ignition;

4. Ignition timing can be arbitrarily set around 0 ~ 99.99 seconds, continued burning time and flame time can be automatically recorded and digitally displayed;

5. The flame height can be adjusted;

6. The "push-pull" fixture;

7. The burner is located at the sliding track, easily operated, when pushed to the combustion position, automatic timing.

8. Pin valve can precisely control the gas flow and adjust standard flame height around 38.1mm;

9. According to the test samples, multiple samples holder can be chosen.

10. Brand pressure gauge and pressure regulator can accurately adjust the gas pressure;

11. Bunsen burner tube inner diameter is 9.5mm; the bottom of sample must be higher than the light of 19.1mm

12 .Thermocouple can test the maximum flame temperature about 1000 ºC; flame kerne temperature must be higher than 843 ºC

13.The ignition time can be set freely and the buzzer can remind people when the time is over;

14. PLC microcomputer control system with touch screen can make the experimental process more automaticly and the data can be automatically recorded and stored;

Technical Specifications

1. The ignition timing: 0 to 99.99 seconds set arbitrarily;

2. Afterflame time and antiflaming time recorder: 0 ~ 99.99 seconds, accuracy: ± 0.01 seconds;

3. The flame height measuring device: flame height ruler is about 38.1mm;

4. The gas: methane, propane or butane or liquefied petroleum gas or other flammable gases

5. The power supply: AC220V, 50Hz, 50W

6. Weight: about 70kg

Other supplier products

	Micro Controll High-temperature Friction Tester	Applicable Standards When conducting tests, the microcomputer - controlled high - temperature friction testing machine usually needs to comply wit...
	Suture Needle Penetration and Bending Strength Tester	The Suture Needle Penetration and Bending Strength Tester is a device used to test the penetration performance and strength of medical suture needl...
	Gas Hazardous Characteristics Tester	Product Introduction This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure f...
	Low-Load Wear Testing Machine	The Low-Load Wear Testing Machine is specifically designed to measure wear behavior under extremely small loads that were previously difficult to e...
	Spring torsion tester	The Spring Torsion Tester is designed to precisely measure torsional properties, including torque and angle, for a wide range of torsion springs an...

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...