Automatic Bobbin Machine

• 

Functions of bobbin machine and common debugging methods:

Being familiar with equipment function and winding process

When buying the bobbin machine, the first step is to electric no-load test operate. The process firstly is to check whether the inspection of the bobbin machine running smoothly and whether there is abnormal noise. The debugging personnel in the process should control the

automatic bobbin machine

instruction one by one checking each function is valid, and it is also a process of being familiar with the equipment. After being preliminary familiar with equipment's function according to its own products winding process, to find the corresponding equipment function, combining with the winding process to see if the function of the equipment is consistent with the requirements of the winding. Equipment function requires the detailed communication with the supplier when purchasing, avoiding the requirements of the equipment after the purchase is inconsistent with the requirements of the winding. The allowable line diameter, the maximum weight, the width of the line and the precision of the equipment should be noted, these parameters are the basic data to determine whether the equipment meets the requirements of the winding.

Equipment attachment setting and data determination

After debugging personnel being familiar with the function of equipment and parameters, it also needs to adjust the tension of the bobbin machine and winding mold data to determine. In general, the larger the diameter of the wire is used, the greater the tension is. The range of tension adjustment for the equipment of different manufacturers is different, and the tension required for the use of aluminum wire and copper wire is also different. The tension required for the same line of aluminum wire is smaller than that of the copper wire, and the tension adjustment over the assembly leads to the smaller line diameter around the die. If it is a fine line, there will be a break, a knot, and so on. If the tension is too small, the coil will be swollen and the line will be disordered. Therefore, the tension adjustment is a key setting. The width and height of the die should be noted for the determination of the winding die. Whether or not it matches the wire rod, it will affect the loading and unloading of the mold, and the loose will result in the effect of the die sloshing on the line effect.

Другие товары поставщика

	BJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine	Technical parameters ofBJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine Type Automaticcomputersingleheadterminalcrimping...
	Tube Cutting Machine	Tube Cutting Machine BJ-02AT Automatic Corrugated Pipe Cutting Machine * Power supply: AC220V* Voltage: 500W* Weight: 85kg* G.N: 72kg...
	Pneumatic Terminal Crimping Machine	Pneumatic Terminal Crimping Machine Cable Hydraulic Crimping Machine BJ-30T * Force:20Ton* Applicable Scope:1-200mm² wire* Strok...
	Automatic Tape Dispenser	M-1000 Automatic tape dispenser * Tape Width: 7 ~ 50mm* Cut Length: 5 ~ 999mm, Digital Length Adjustment.* Length setting: Digital* Ac...
	Wire Stripping Machine	Common failures and methods ofwire stripping machine. 1. The length of front wire is different.A. If the clearance is too large for the left trans...

Похожие товары

	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Продавец: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...
	Floor Type Boring Mill	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ...