AC Model Inductive Proximity Switch For Sale
SpecificationsAn inductive proximity switch consists of 4 main components: coil, oscillator, detection circuit and solid state switching device. The oscillator creates a high frequency field that is emitted from the sensing face. When a metal target enters that field, eddy currents are induced in the metal target (hence the term INDUCTIVE). Energy is required from the oscillator to maintain the eddy currents in the target. As the target enters the sensing range of the sensor, the energy required becomes too great for the oscillator, and it stops. The detection circuit senses this and signals the switch to change state. After the metal target leaves the sensing range, the oscillator resumes functioning, and the switch returns to its normal state (either Normally Open or Normally Closed).Technical SpecificationsModelIPS-D-4-M1665Size mmM-16x65Voltage (VDC)5-40Max. Load Current (mA.)300Sensing Distance (mm) FM NFM46Switching Frequency (Hz.)350Voltage Drop At Full Load (VDC)2.5No.Load Current (mA)>10.0Position IndicationLEDResidual Current (mA.)0.001Cable Length(mm)2000Housing MaterialBrassNote:
Другие товары поставщика
|
|
LSAZ-80-P is a horizontal internal mounting level switches, Made of Plastic (PP), lower cost, with M16 mounting threads. If you needed, It can be m... |
|
|
1、DescriptionMEVS series speed sensor is totally developed and manufactured by Yuanben. Its output signal frequency is proportional to the gear spe... |
|
|
New developed FS-300 flow switches is made of SUS304 material, with 3/4"FNPT threads, with proven accuracy, ideal for critical low flow or high flo... |
|
|
1、DescriptionMPS series proximity switch is a kind of switch type sensor. It is consist of a magnetic red switch and magnet.It can make detection w... |
|
|
When the Flow Alarm detects high or low liquid flow, it raises the alarm with a loud beeper and flashing LED. Flow Alarm detect low flow When power... |
Все товары поставщика
Похожие товары