FeAl Soft Magnetic Alloy
FeAl soft magnetic alloyFeAl soft magnetic alloys 1J6,Website:, 1J12, 1J13, 1J161. Fe-Al alloys contain 6% to 16% aluminum , the rest elements is the iron.2. The alloys have high resistivity, lower density and higher hardness of soft magnetic alloy.3. This family of alloy is suitable for the special environment (such as nuclear radiation, shock, acceleration, etc.), and resistance to corrosion and oxidation resistance are better than those of nickel-iron&soft magnetic alloys, and silicon steel. Thus, in the fields of aviation, space flight, navigation, and other civilian and military industries, Fe-Al alloys have accessed to a broad industrial application.4. The four Grade of FeCr alloy we produce is 1J16,1J13,1J12,1J6.5. With high permeability and low coercive force, 1J16 alloy is appropriate to use under the condition of wea mannetic field.6. With high saturation magnetostriction coefficient, 1J16 alloy is appropriate to produce ultrasonic device.7. With high permeability and high magnetic induction, 1J12 alloy is appropriate to work under the condition of mid-magnetic field.8. With high saturation magnetic induction, 1J6 alloy is appropriate to work under the condition of strong magnetic field.9. The resistivity of Fe-Al alloys are increased by the increasing of the content of Al., however, the saturation magnetic induction is decreased by the increasing of the Al.. Compared with Fe-Ni alloys, the magntic propertise of Fe-Al alloys are much lower than Fe-Ni alloys.GradeCompositonRelative GradeStandardRussiaU.S.A.JapanGermany1J6FeAl6---GB/TJ12FeAl121212AlfenolHypermal1J13FeAl1313Alfer1J16FeAl1616AlpermVacodur16Table 1 Physical PropertyGradeResisitivity/( m)Density/(g/cm3)Curie Point/ CAnnealedQuenched1J60.77.21J121.06.76551J130.91.25~1.306.65l01J161.40~1.606.5Table 2 Magnetic PropertyGradeSortThickness & DiameterMagnetic Induction at different Magnetic Field IntensityHc/(A/m)CoercivityIron Loss/(W/kg)B500B1000B2500P0.75/400P1/400T1J6Cold Rolled Strip0.10~0.501.151.251.3548122lHeat Rolled (forged) Bar8~1001.101.151.3064NOTE: Iron loss P0.75/400 and P1/400 represent iron loss when peek magnetic induction strength reaches 0.75T and 1T at 400 Hz, respectively.Table 3 Magnetic PropertyGradeSortThickness/mm0.4/(mH/m)o.8/(mH/m)m/(mH/m)THc/(A/m)Br/TB2400B32001J12Strips rolled at Medium Temperature0.20~1.003.131.31.21.3120.51J130.20~1.001J160.20~ 0.35562.50.653.20.40.35~1.007.537.50.653.20.4
Другие товары поставщика
|
|
|
Pressing Bonded NdFeBPressing Bonded NdFeB magnet is made by mixing the isotropic quenched NdFeB magnetic powder with polymer materials,Website:, t... |
|
|
|
Elgiloy AlloyPrecision Alloy 3J21*Elgiloy alloy(Co40CrNiMo),Website: 5833,UNS R30003,Chinese 3J21Usage: It is applied to make antimagnetic, corrosi... |
|
|
|
Magnetic ProbeMagnetic Probes are used for sample inspection. High intensity magnetic sampling probes are ideal for quality control personne to qui... |
|
|
|
FeAl soft magnetic alloyFeAl soft magnetic alloys 1J6,Website:, 1J12, 1J13, 1J161. Fe-Al alloys contain 6% to 16% aluminum , the rest elements is ... |
|
|
|
FeCoMo Hysteresis alloysThe advantage:With hysteresis characteristics well in high magnetic fieldsRepresentative Grade:2J21,Website:, 2J23, 2J25, 2... |
Все товары поставщика
Похожие товары
