Automatic Down Filling Tester / Down and Feather Testing Machine

• 

Introduction

The loftiness index is one of the important indicators of feather and down quality. It is a concentrated manifestation of the internal quality in terms of elasticity and thermal insulation performance. At the same time, it also indirectly reflects the degree of dispersion of the various components of feathers and down. Loftiness testing is an important part of down testing. It refers to the elasticity of down (feathers), which is obtained by measuring the volume occupied by a certain amount of sample down (feathers) under a constant weight pressure in a container with a certain caliber. Since the greater the loftiness, the greater the amount of static air contained, and the static air layer is a good thermal insulation layer, there is a good linear relationship between the loftiness of down and the thermal insulation performance of down products.

Technical Parameters

Control System: PLC

Operating Interface: Color 7-inch touch screen, with Chinese and English switching

Measuring Cylinder:

Diameter (large cylinder): 288 mm; (small cylinder): 244 mm

Cylinder Height: 500 mm

Cylinder Material: Acrylic

Sample Filling Amount: CEN 20 g; DIN EN 12130 20 g; USA 30 g; JIS 30 g

Weight Disc:

Material: PMMA

Inner diameter (large cylinder): 284 mm; (small cylinder): 239 mm

Load Weight: European and American standards (*** & ASTM) 94.5 g; Japanese standard (JIS) 120 g

Pressure:

European and American standards (*** & ASTM): 0.14878 g/cm³

Japanese standard (JIS): 0.188 g/cm³

Air Volume for Fluffing the Sample: 30 L

Hanging Rod of the Pressing Disc: Soft

Descending Speed When the Test Program Encounters Down Feathers: Less than 0.3 m/min

Overall Dimensions: 760 * 480 * 1480 mm

Total Weight of the Machine: 69 kg

Standards Applicable to the Automatic Down Filling Tester

IDFB-FP, BSEN12130. GB/T10288. FZ/T80001. GB/T14272. GB/T12705.2. FTMS191A, JISL 1903. etc.

Другие товары поставщика

	Geomembrane Environmental Stress Cracking Resistance Tester	Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin...
	Sponge foam collapsible hardness tester / Sponge foam collapsible hardness machine	Purpose: This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested accordin...
	PLC liquid crystal touch impact testing machine (simple suspension)	Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile)， reinf...
	SUGA U48 Carbon Arc Aging Tester	Main purpose: The Si80 domestic carbon arc aging chamber is a comprehensive climate testing device mainly used to simulate the changes in materi...
	Helmet UV Pretreatment Box Tester / Helmet UV pretreatment box	Product Introduction Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national st...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...