Automatic Down Filling Tester / Down and Feather Testing Machine
Introduction
The loftiness index is one of the important indicators of feather and down quality. It is a concentrated manifestation of the internal quality in terms of elasticity and thermal insulation performance. At the same time, it also indirectly reflects the degree of dispersion of the various components of feathers and down. Loftiness testing is an important part of down testing. It refers to the elasticity of down (feathers), which is obtained by measuring the volume occupied by a certain amount of sample down (feathers) under a constant weight pressure in a container with a certain caliber. Since the greater the loftiness, the greater the amount of static air contained, and the static air layer is a good thermal insulation layer, there is a good linear relationship between the loftiness of down and the thermal insulation performance of down products.
Technical Parameters
Control System: PLC
Operating Interface: Color 7-inch touch screen, with Chinese and English switching
Measuring Cylinder:
Diameter (large cylinder): 288 mm; (small cylinder): 244 mm
Cylinder Height: 500 mm
Cylinder Material: Acrylic
Sample Filling Amount: CEN 20 g; DIN EN 12130 20 g; USA 30 g; JIS 30 g
Weight Disc:
Material: PMMA
Inner diameter (large cylinder): 284 mm; (small cylinder): 239 mm
Load Weight: European and American standards (*** & ASTM) 94.5 g; Japanese standard (JIS) 120 g
Pressure:
European and American standards (*** & ASTM): 0.14878 g/cm³
Japanese standard (JIS): 0.188 g/cm³
Air Volume for Fluffing the Sample: 30 L
Hanging Rod of the Pressing Disc: Soft
Descending Speed When the Test Program Encounters Down Feathers: Less than 0.3 m/min
Overall Dimensions: 760 * 480 * 1480 mm
Total Weight of the Machine: 69 kg
Standards Applicable to the Automatic Down Filling Tester
IDFB-FP, BSEN12130. GB/T10288. FZ/T80001. GB/T14272. GB/T12705.2. FTMS191A, JISL 1903. etc.
在线联系供应商
Other supplier products
 |
Falling ball rebound instrument | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The falling ball rebound instrument is designed and manufactured according to GB/T... |
 |
AT1000 Abrasion Resistance Tester | Device description The at1000 wear tester has been used around the world since 1970 and is ideal for comparison and quality control of platelet-sh... |
 |
FAA Oil Burner for Insulation Burn Through Resistance | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Flame Penetration Fuel Test System for Thermal and Acoustic Insulation Materia... |
 |
Yarn Twist Tester | Get a quote: Whats/App: +86 181 0160 0864 The Yarn Twist Tester is a precision instrument designed to measure the twist level and twist direction... |
 |
Spinous Process Fixation Plate System Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinous Process Fixation Plate System Fatigue Testing Machine is a specialized... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
