Slip Resistance Tester ASTM F2913

• 

Introduction

Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequently result from major slips and slipping can also be the initial cause for a range of other types of accident, such as fall from height. Significant numbers of slip accidents also occur in the home and during sports and recreation.

Footwear has to be fit-for-purpose, which means that it should be fit for all its intended purposes, including any indicated by the retailer, and provide a reasonable and appropriate degree of safety. Legislation and regulations help to define what this means. Where there are specific hazards to be managed, it may mean providing slip-resistant safety floors and/or slip-resistant footwear.

Footwear non-slip performance directly affects the safety and comfort of shoes, poor slip, means that there is a potential risk to personal safety, especially easily lead to crash in the wet, light, slippery ground for children and the elderly and other vulnerable groups. Many slippage and falls are very serious. Slip and slippage occur only for a moment, but the consequences may be accompanied by life. At present, slipping has been considered to be one of the main causes of accidents in the workplace, public places and home environment.

The unique design of the slip resistance tester can measure the slip resistance of the shoes with the standard ground, and measure the slip resistance of the floor material with the standard sole material. The fast and accurate control and data acquisition system ensure the force and speed requirements in the test process with the intuitive and convenient visual display results.

Standards

1. ASTM F2913 standard test method for measuring the coefficient of friction for evaluation of slip performance of footwear and test surfaces/flooring using a whole shoe tester

2. BS EN 13287 Personal protective equipment. Footwear. Test method for slip resistance

3. GB/T 28287 Foot protection- Test method for footwear slip resistance

4. EN ISO 20344 Personal protective equipment - Test methods for footwear

5. Satra TM144A New Method of Non - slip Test for Footwear

6. CEN/TC 161 WG3

Features

Fast fasten device can quickly install the sample and lock with the host. It simplify the sample installation process to avoid the differences test results and improve test experience and test results accuracy.

Real - time load acquisition system.

Support component and regulator indicator, real-time display test status.

Pneumatic lifting control system to meet the requirements of different thickness test specimens.

Irregular surface support tools to adapt the surface of the test material, providing the uniform load and the pilot force.

Adjustable test inclination to meet different test requirements.

Dial-type adjustment, convenient and quick. You can observe the tilt angle changes and adjust promptly in the test process.

Real-time analysis management software provides the visual display of maximum friction, minimum friction, the average friction.

Automatically calculate the friction coefficient.

Multi-Path output.

The software has Windows high compatibility features.

Другие товары поставщика

	Carbon Black Content Tester / Carbon Black Content Apparatus	Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ...
	Luggage rod reciprocating fatigue testing machine / Luggage Fatigue Tester	Product Introduction: Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stre...
	Schopper Folding Endurance Tester ISO 5626	Use and Scope of application: 1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding d...
	Film impact tester ISO 6272	Product Introduction The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film samp...
	Safety shoe impact testing machine / Safety shoes testing machine	According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344. ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 Product F...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...