Ross Flex Tester / Ross Flexing Apparatus / Flex Tester

• 

Product Introduction:

The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is directly above the center of the rotating shaft of the ROSS zigzag test machine, and drove the test piece to perform free 90-degree zigzag on the shaft through the ROSS zigzag test machine. After a certain number of tests, the length of the test piece incision is measured. The zigzag resistance of the test piece was evaluated by the size of the notch growth rate.

Reference standard:

GB/T2099-2007. ASTM-D1052. ISO-5423. SATRA TM60. HB-T2411HG/ T2411 and other standards

Product Advantages:

Measures Key Durability: Quantifies the resistance of sole materials to flex cracking and notch growth, a vital indicator of footwear lifespan.

Standard Compliant (ROSS Method): Designed to meet numerous relevant international and national standards (ASTM D1052. SATRA TM60. etc.) specifically for the ROSS flex test.

Quantitative Result: Provides objective data based on the measured growth rate of the pre-cut notch.

Multiple Testing Stations: Allows simultaneous testing of multiple test pieces (12), significantly increasing testing efficiency.

Controllable Test Parameters: Enables precise setting and control of the bending angle (90$pm$2º) and flexing speed (0-100 r/min).

Automatic Stop Function: Can be set to stop automatically after a specified number of test cycles.

Suitable for Sole Materials: Specifically designed for evaluating the flex fatigue characteristics of sole strips.

Random configuration:

1. One machine

2. 1 knife die

3. One power cable

4. One cutting knife

5. One copy of instructions

6. One delivery note

Technical parameters:

1. simultaneous measurement: (12 test pieces)

2. bending Angle: 90±2º

3. speed: 0-100r/min can be switched.

4. controller: LED-SLD806 integrated display control function

5. hole punch: 2.5mm

6. Test mode; Automatic stop when the test time is reached

7. fixture features: can test the sole at the same time can test pieces

8. zigzag shaft diameter: 10mm.

9. sample method: sole test piece

10. sample size: 152×25mm

11. Power supply: AC220V,10A

Другие товары поставщика

	3D Geophysical Instrument	Product Introduction: The 3D Formation Tester measures layers of paper, fiberglass, cardboard, paper towels and towels, and many other sheetlike m...
	High and low temperature memory impact testing machine	Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,...
	Geomembrane thickness tester丨Geomembrane thickness machine	Scope of Application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ...
	Adhesion Tester | Precision Adhesion Tester	The adhesion tester is a device specifically used to detect the strength of the adhesion of materials. The following is a detailed description of i...
	Thin Film Pendulum Impact Tester / ASTM D	Compliance Standards GB/T 8809 ASTM D3420 Main Uses The film pendulum impact tester is mainly used to determine the resistance to pendulum impac...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...