.

Ross Flex Tester / Ross Flexing Apparatus / Flex Tester

Product Introduction:

The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is directly above the center of the rotating shaft of the ROSS zigzag test machine, and drove the test piece to perform free 90-degree zigzag on the shaft through the ROSS zigzag test machine. After a certain number of tests, the length of the test piece incision is measured. The zigzag resistance of the test piece was evaluated by the size of the notch growth rate.

Reference standard:

GB/T2099-2007. ASTM-D1052. ISO-5423. SATRA TM60. HB-T2411HG/ T2411 and other standards

Product Advantages:

Measures Key Durability: Quantifies the resistance of sole materials to flex cracking and notch growth, a vital indicator of footwear lifespan.

Standard Compliant (ROSS Method): Designed to meet numerous relevant international and national standards (ASTM D1052. SATRA TM60. etc.) specifically for the ROSS flex test.

Quantitative Result: Provides objective data based on the measured growth rate of the pre-cut notch.

Multiple Testing Stations: Allows simultaneous testing of multiple test pieces (12), significantly increasing testing efficiency.

Controllable Test Parameters: Enables precise setting and control of the bending angle (90$pm$2º) and flexing speed (0-100 r/min).

Automatic Stop Function: Can be set to stop automatically after a specified number of test cycles.

Suitable for Sole Materials: Specifically designed for evaluating the flex fatigue characteristics of sole strips.

Random configuration:

1. One machine

2. 1 knife die

3. One power cable

4. One cutting knife

5. One copy of instructions

6. One delivery note

Technical parameters:

1. simultaneous measurement: (12 test pieces)

2. bending Angle: 90±2º

3. speed: 0-100r/min can be switched.

4. controller: LED-SLD806 integrated display control function

5. hole punch: 2.5mm

6. Test mode; Automatic stop when the test time is reached

7. fixture features: can test the sole at the same time can test pieces

8. zigzag shaft diameter: 10mm.

9. sample method: sole test piece

10. sample size: 152×25mm

11. Power supply: AC220V,10A


在线联系供应商

至: Standard Group (Hong Kong) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Suitcases Vibration Impact Tester / Luggage Vibration Impact Tester
Suitcases Vibration Impact Tester / Luggage Vibration Impact Tester Product Introduction: This machine is used to test the shock resistance of various luggage handles, car stitches and overall structure. The method...
Auto - ignition Point Tester for Liquids / ASTM E659
Auto - ignition Point Tester for Liquids / ASTM E659 Standards This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005) ...
SUGA SX75 7.5kW Super Xenon Weather Meter
SUGA SX75 7.5kW Super Xenon Weather Meter SX75 accelerates the degradation of materials by exposing them to simulated outdoor and indoor environments such as sunlight,temperature,humidity...
Shoelace anti-siphon tester 丨Shoelace Tester
Shoelace anti-siphon tester 丨Shoelace Tester Product Introduction Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon water...
Environmental Stress Cracking Resistance Tester / ESCR Tester 
Environmental Stress Cracking Resistance Tester / ESCR Tester  Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on polyethylene and other thermoplastics. ISO 22088-3: Configu...
供应产品

Same products

Bottle Wall and Bottom Thickness Tester
Bottle Wall and Bottom Thickness Tester 卖方: Standard Group (Hong Kong) Limited The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
Pinhole Tester / Pinhole Testing Equipment
Pinhole Tester / Pinhole Testing Equipment 卖方: Standard Group (Hong Kong) Limited The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
Cork Puncture and Chip Detection Instrument
Cork Puncture and Chip Detection Instrument 卖方: Standard Group (Hong Kong) Limited The rubber stopper puncture debris detector is a device specifically used to detect the number of...
Aluminum Ointment Tube Toughness Tester
Aluminum Ointment Tube Toughness Tester 卖方: Standard Group (Hong Kong) Limited The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
Vacuum leak tester / Vacuum leak instrument
Vacuum leak tester / Vacuum leak instrument 卖方: Standard Group (Hong Kong) Limited Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...