Micro Controll Four-ball Friction Tester
Applicable Standards：
When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the following relevant national or international standards: GB/T 12583 - 98: Method for Determination of the Extreme - Pressure Properties of Lubricants (Four - ball Machine Method). GB 3142 - 82: Method for Determination of the Load - Carrying Capacity of Lubricants (Four - ball Method). SH/T 0189 - 92: Method for Determination of the Anti - wear Properties of Lubricating Oils (Four - ball Machine Method). SH/T 0202 - 92: Method for Determination of the Extreme - Pressure Properties of Greases (Four - ball Machine Method). SH/T 0204 - 92: Method for Determination of the Anti - wear Properties of Greases (Four - ball Machine Method). These standards specify the requirements for the test methods, test conditions, data processing, etc. of the four - ball friction testing machine to ensure the accuracy and comparability of test results.
Technical Parameters：
Test force range (infinitely adjustable)： 60N~10kN
Relative error of test force： ±1%
Test force long time holding error： ±1%F.S
Friction force test range： 0~300N
Friction force test error： ±3%
Spindle rotation speed range (infinitely adjustable)： 200~2000r/min
Spindle rotation speed error： ±5 r/min
Temperature control range of the friction side Room temperature~：150°C
Temperature control error of the friction side： ±2○C Test time control range 1sec~999hours Test time control range 1~9999999999rpm Test steel ball φ12.7mm Overall dimension 100*870*1700 (Test ball Temperature control error ±2○C
Test time control range： 1sec~999hours
Spindle speed control range： 1~99999999 rpm
Test steel ball： φ12.7mm
Overall dimensions： 1200*870*1700 (mm)
Weight：800kg
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Helmet Strap Tensile Strength Measuring Instrument | Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cer... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Image test standard transmission light box | Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664:2009: Compliant with viewing conditions for graphic art... |
 |
Building material burning tester | Technical specifications TheBuilding material burning testeris designed and manufactured according to the standard gb8626-88 and is used to determ... |
 |
Spectrophotometer | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
Похожие товары
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
