Mechanical load testing machine for photovoltaic modules

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules

UL 1703: Flat-Plate Photovoltaic Modules and Panels

CE Certification(Conformité Européenne)

Product Advantages

Multi-Standard Compliance

5.400 Pa Forward / 2.400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.

1.000 Pa Dynamic Testing: 1.000-cycle fatigue simulation for hail/debris impact.

Ultra-Precise Control

0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.

7+3s Cycle Timing: Mimics real-world pulsating wind loads.

Automated Testing

Programmable Cycle Count: 1–99.999 cycles with auto-stop at failure.

AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.

Safety First

Emergency Shutoff: Dual redundant safety circuits with load cell override.

Overload Protection: 6.000 Pa max pressure cutoff.

Modular Design

Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.

Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

Dual-Mode Operation: Static/dynamic load testing with auto-switching.

10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Accessories Included

Testing Kit:

4x PV module clamping fixtures (adjustable for 16–40 mm frames).

10x load distribution pads (anti-skid rubber).

Software Suite:

License key forLoadTest Pro(Windows/Linux).

1-year free access to cloud-based fatigue analysis tools.

Calibration & Safety:

NIST-traceable pressure gauge.

Safety harness kit for large modules.

Maintenance Kit:

Spare O-rings and cylinder seals.

Machine cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

Parameter	Specification
Test Area	2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load	5.400 Pa (adjustable)
Reverse Load	2.400 Pa (adjustable)
Dynamic Load	1.000 Pa, 1.000 cycles (7s+3s timing)
Pressure Accuracy	±5% of setpoint
Force Sensor	0.1N resolution, 10 kN capacity
Power Supply	230V AC, 50/60Hz (single-phase)
Air Supply	6–8 bar (clean/dry air required)
Weight	1.200 kg (net) / 1.500 kg (gross)

Другие товары поставщика

	Strength Tester for Lead - end of Photovoltaic Modules	Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat...
	Urinary Catheter Strength Tester	The Urinary Catheter Strength Tester is designed to evaluate the physical strength and mechanical properties of urinary catheters. It provides accu...
	zipper reciprocating fatigue testing machine	Application The instrument is widely used to evaluate the durability and service life of zippers with various length in the fields of clothing acc...
	Micro Controll Four-ball Friction Tester	The microcomputer-controlled four-ball friction testing machine uses a sliding friction method under point contact pressure conditions at the extre...
	Spring torsion tester	The Spring Torsion Tester is designed to precisely measure torsional properties, including torque and angle, for a wide range of torsion springs an...

Все товары поставщика

Похожие товары

	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...
	Flame retardant testing machine	Продавец: Qinsun Instruments Co., LTD	Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...