45 Degree Flammability Tester
Testing Standards:
ASTM D1230. FTMS 191-5908. CFR 16 Part 1610. CALIF TB 117. NFPA 702. GB/T 14644
Applications:
45 degree flammability tester is designed to determine the burning characteristics of textiles. Stainless steel test cabinet with glass observation panel, provided with automatic timing of flame spread in 0.1 second increments from ignition. Ignition timefreeSettings.
Structure:
Flowmeter:Adjust the gas flow size;
Fire tube: The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe;
Windscreen: the upper part of the windshield is provided with glass;
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
Control panel:Power- power switch ;Start：Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
Reset:Timer reset /Fire tube reset;
Sample clamp and specimen holder:The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob;
Timer:Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward;
Test room size: W368 × D216 × H356mm
Sample shelf angle: 45 °
Flame spread time setting range: 0.01S-99.99S
ignition time of the sample surface: 1.0S ± 0.05S
Body stainless steel structure:
SCM control, control interface friendly, easy to operate
Heavy hammer timing stop device, timing accurate
Standard fire mouth
Accessories and Consumables:
Combustion gas supply Device
50 mercerized cotton sewing machine line
Technical Parameters:
A、Stainless steel test cabinet with glass observation panel.
B、Automatic timing of flame spread in 0.1 second increments.
C、Automatic or manual flame impingement for 1.5 or 20 seconds.
D、Automatic or manual ignition device.
Accessories and Consumables:
1、Brushing Device.
2、Burners(Pack of 5)
Product Display
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Building material products single combustion tester | Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C... |
|
|
45 Degree Flammability Tester | Testing Standards: ASTM D1230. FTMS 191-5908. CFR 16 Part 1610. CALIF TB 117. NFPA 702. GB/T 14644 Applications: 45 degree flammability tester i... |
 |
Burning Manikin System | The burning manikin system is used to test the overall thermal protection performance of protective clothing.Complete combustion manikin system, wh... |
 |
Fabric horizontal burning tester | Horizontal Flammability Tester; Mainly used for determining the horizontal burning rate of materials used in the occupant compartment of road vehic... |
 |
Steel Structure Fireproof Coating Small Sample Test Furnace | Product Overview TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specialized thermal testing instrument designed to evaluat... |
Похожие товары
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Продавец: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
