Low-impurity titanium carbide powder
Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components. Coating it on the surface of steam turbine blades can resist the erosion and oxidation of high-temperature gas, thereby extending the service life of the blades. The powder has a high grinding efficiency and can be used to make abrasives. When grinding hard alloys, its efficiency is twice that of alumina abrasives. In the processing of optical glass, the grinding tools made of this powder can ensure the high smoothness of the glass surface. This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K), and can be used to make conductive ceramics, heating elements, etc. After being compounded with copper powder, the resulting composite material features both high hardness and high electrical conductivity, making it suitable for manufacturing spark electrodes, with the electrode loss rate reduced to below 0.1%. The particle size distribution of the powder is narrow, and the ratio of D50 to D90 is less than 1.5, which can ensure the uniformity of the density of the formed green body and reduce the deformation after sintering. In the field of electronic packaging, it can be used to prepare high thermal conductivity packaging materials to solve the heat dissipation problem of chips.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Titanium carbide hard alloy rods - Strong load-bearing capacity | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is amenable to secondary proc... |
 |
Chemically stable chromium carbide powder | Chromium carbide powder is a grey-black powder with a melting point of about 1890°C and a Mohs hardness of 8.5. It has excellent wear resista... |
 |
Carbide round rods for precision instruments | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。... |
 |
Plasma Sintered Chromium Carbide Powder | Chromium carbide powder is a grey-black powder with a melting point of about 1890°C and a Mohs hardness of 8.5. It has excellent wear resista... |
 |
Titanium carbide powder that meets international standards | Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I... |
Похожие товары
 |
Aluminum Alloy Wheels Scrap For Sale, Scrap Aluminium Wheel Scrap Supplier, Aluminum Wheels Scrap For Sale, Aluminum Rim Wheels Scrap Supplier | Продавец: Best Link Scrap Inc-plastic recycling | Компания Best Link Scrap Inc. специализируется на поставке высококачественного лома алюминиевых д... |
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
