Titanium carbide hard rods are in stock and dispatched directly

• 
• 
• 
• 
• 

Titanium carbide (TiC)-based cemented carbide round rods offer tunable mechanical properties through precise control of TiC content (typically 70–90 wt.%) and binder phase proportion. Elevated TiC content enhances hardness and abrasive wear resistance, rendering the material particularly suitable for heavy-duty rough machining operations. Conversely, increasing the binder volume fraction (e.g., nickel or cobalt) improves fracture toughness and impact resistance, thereby optimizing performance in high-precision finishing applications. With a density of approximately 6.5 g/cm³—about 20% lower than that of conventional tungsten carbide (WC)-based rods of equivalent dimensions—TiC-based rods enable the fabrication of lightweight, high-stiffness cutting tools. In the 3C electronics sector, they are widely employed for machining critical precision components—including smart frames and laptop housings—delivering exceptional surface integrity (scratch-free finishes) and dimensional accuracy (tolerances within ±5 µm). Furthermore, advances in additive manufacturing have enabled the production of TiC-based spherical powders for laser powder bed fusion (LPBF); sintered parts exhibit >99.5% relative density and mechanical performance comparable to conventionally sintered counterparts. In photovoltaic manufacturing, TiC-based cutting tools are utilized for slicing silicon wafers, achieving thickness uniformity within ±1 µm and contributing to enhanced solar cell conversion efficiency. Owing to this broad functional adaptability across demanding industrial domains, TiC-based cemented carbides have become a strategic enabling material in advanced manufacturing.

Другие товары поставщика

	Chromium carbide powder with particle size reaching submicron level	Chromium carbide powder exhibits outstanding high-temperature oxidation resistance, with a low oxidation rate below 900°C in air. The oxide fil...
	Titanium carbide hard alloy guide wheel - Customized version	这种硬质合金碳化钛导轮具有优异的抗热冲击性能。即使温度从室温骤升至300℃，再骤降至室温，也不会发生开裂，因此适用于间歇性生产环境。导轮尺寸范围广，直径从50mm到500mm，宽度从10mm到100mm，可适配不同类型的拉丝或轧制设备。在光纤和光缆生产中，它可以精确引导光纤，使光纤衰减率保持在...
	Industrial guide wheels - made of titanium carbide	The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ...
	Customised titanium carbide round rods	Tungsten carbide titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard p...
	Titanium carbide powder that meets international standards	Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I...

Похожие товары

	Aluminum Alloy Wheels Scrap For Sale, Scrap Aluminium Wheel Scrap Supplier, Aluminum Wheels Scrap For Sale, Aluminum Rim Wheels Scrap Supplier	Продавец: Best Link Scrap Inc-plastic recycling	Компания Best Link Scrap Inc. специализируется на поставке высококачественного лома алюминиевых д...
	3D printing spherical titanium carbide powder	Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont...
	Titanium carbide hard alloy drive wheel - Specialized	Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte...
	Industrial guide wheels, titanium carbide wear-resistant alloy	Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ...
	Unfinished bar stock - heat treatable	Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter...