Voltage Drop Tester for Automotive Wire Connectors
The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pins of non - rewirable plugs and the leads of connecting plugs, so as to judge the quality of the connection interfaces. It can also be used for testing the contact voltage drop of terminals in connectors and wire harnesses. It complies with the ISO 8092.1 - .4 series of standards and relevant standards such as QC/T417.1 - 417.5 - 2001 for automotive wire harness connectors.
Technical Features:
This instrument features adjustable high - current output, micro - voltage testing, and digital tube display.
Main Parameters:
1. Input voltage: AC220V + 10%, 50Hz
2. Working current (DC): 0 - 100A (optional values including 5A, 10A, 20A, 50A, 100A, 200A, 500A, 1000A) and can be adjusted arbitrarily 3. Current output mode: Constant current
4. Voltage drop range: 0 - 20V (with three voltmeters of different accuracies for 0 - 200mV / 0 - 2V / 0 - 20V). The display ranges are 0.01 - 199.99mV / 0.1 - 1999.9mV / 1 - 19999mV respectively
5. Power: 3200W, maximum output voltage: 32V
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Smoldering performance test furnace of thermal insulation material | Product Introduction: Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control sys... |
 |
Automotive seat frame durability tester-QINSUN | Applicable standards: GB 11550-2009 "Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies th... |
 |
Fully Automatic Stripping Machine for Automotive Wires | The fully automatic stripping machine for automotive wires complies with the standards of GB/T2951 - 2008 and IEC60811 *General Test Methods for ... |
 |
Fabric Down-Proof Impact Tester (Impact Method) | Introduction The first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact nee... |
 |
Digital Auto Burst Strength Tester-QINSUN | Digital Auto Burst Strength Tester Standards ASTM D3786. ERT 80-4-20. GB/T 7742.1. BS EN ISO 13938-1. BS 3424-6-B, ISO 3303-B, ISO 2758. ISO 3303... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
