MANUAL TONGS
MANUAL TONGS
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs. They are designed and manufactured according to API Spec 7K.
Manual tong type B:
No.of Latch Lug Jaw Latch Step Size Range Rated Torque
in mm kN•m
5a 1 3 3/8~4 1/8 85.7~104.8 55
2 4 1/8~5 1/4 104.8~133.3 75
5b 1 4 1/4~5 1/4 107.9~133.3
2 5~5 3/4 127~146
3 6~6 3/4 152.4~171.4
5b1 1 5 1/4~5 3/4 133.3~146
2 6~6 5/8 152.4~168.3
3 6 3/4~8 171.4~203.2 55
5c 1 6 5/8~7 3/8 168.3~187.3 75
2 7 3/8~8 187.3~203.2
3 8 1/2~8 5/8 215.9~219 55
5d 1 8 1/2~9 5/8 215.9~244.5
2 10 5/8~10 3/4 269.9~273
5e 1 11 3/4 298.5
2 12 3/4 323.8
5e1 1 10 3/4 273
2 11 3/4 298.5
5e3 1 13~13 3/8 330.2~339.7
Manual tong type DB:
No. of Latch Lug Jaw No. of Hinge Pin Hole Size Range Rated Torque
in mm kN•m
1# Ⅰ 3 1/2~6 88.9~152 90
Ⅱ 5 3/4~7 146~178
Ⅲ 6 5/8~8 1/4 168~210
2# Ⅰ 8~9 5/8 203~244
Ⅱ 10 5/8~11 1/4 270~286
3# Ⅰ 11 3/4~12 3/4 298~324 55
Ⅱ 13 3/8~14 3/8 340~365
4# Ⅱ 16~17 406~432
Manual tong type C:
Lug Jaw No. Short Jaw No. Hinge Jaw No. Pipe Size Rated Torque
in mm KN•m
1# 1# / 2 3/8-3.668 60.33-93.17 48
2# 1# / 2 7/8-4 1/4 73.03-108
3# 1# / 3 1/2-5 1/4 88.9-133.35
4# 1# / 5 1/2-7 139.7-177.8
5# 2# 1# 7-8 5/8 177.8-219.08
6# 2# 2# 9 5/8-10 3/4 244.5-273.05
Manual Tong Type AAX
Lug Jaw No. Pipe Size Rated Torque
in mm KN•m
1# 2 7/8-3 3/4 73-95.25 75
2# 3 1/2-4 1/2 88.9-114.3
3# 4-5 1/4 101.6-133.35
4# 5-7 1/4 127-184.15
5# 6 7/8-8 5/8 174.6-219.1
6# 9-10 3/4 228.6-273.05 40
7# 10 3/4-11 3/4 273.05-298.45
8# 13 3/8 339.7
Другие товары поставщика
|
|
Crown Block |
Crown Block
The crown frame is made of high strength steel shapes.
Sheave grooves are hardened by medium frequency induction to provide extended ... |
|
|
Spider |
The Hinged Casing Spider
It has a hinged spider body with a split insert bowl. It is put above rotary table, can handle most casings of different... |
|
|
Heavy Weight Drill Pipe |
Integral or Weld Heavy Weight Drill Pipe
Standard: API Spec 7
Specification: OD 3 1/2”, 4 1/2”, 5”, 5 1/2”
Material: AISI 4145H Alloy Steel and ... |
|
|
Drilling Jar |
Type JZ
This full mechanical drilling jar offers mechanical jarring in both directions. The load scope of the up jarring and the down jarring is s... |
|
|
Pipe fittings |
Tee joints(including straight tee joints and reducing tee joints)
Nominal diameter Wall thickness Steel Grade
250~1500 10~120 X80 and below
Elbo... |
Все товары поставщика
Похожие товары
