MANUAL TONGS
MANUAL TONGS
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs. They are designed and manufactured according to API Spec 7K.
Manual tong type B:
No.of Latch Lug Jaw Latch Step Size Range Rated Torque
in mm kN•m
5a 1 3 3/8~4 1/8 85.7~104.8 55
2 4 1/8~5 1/4 104.8~133.3 75
5b 1 4 1/4~5 1/4 107.9~133.3
2 5~5 3/4 127~146
3 6~6 3/4 152.4~171.4
5b1 1 5 1/4~5 3/4 133.3~146
2 6~6 5/8 152.4~168.3
3 6 3/4~8 171.4~203.2 55
5c 1 6 5/8~7 3/8 168.3~187.3 75
2 7 3/8~8 187.3~203.2
3 8 1/2~8 5/8 215.9~219 55
5d 1 8 1/2~9 5/8 215.9~244.5
2 10 5/8~10 3/4 269.9~273
5e 1 11 3/4 298.5
2 12 3/4 323.8
5e1 1 10 3/4 273
2 11 3/4 298.5
5e3 1 13~13 3/8 330.2~339.7
Manual tong type DB:
No. of Latch Lug Jaw No. of Hinge Pin Hole Size Range Rated Torque
in mm kN•m
1# Ⅰ 3 1/2~6 88.9~152 90
Ⅱ 5 3/4~7 146~178
Ⅲ 6 5/8~8 1/4 168~210
2# Ⅰ 8~9 5/8 203~244
Ⅱ 10 5/8~11 1/4 270~286
3# Ⅰ 11 3/4~12 3/4 298~324 55
Ⅱ 13 3/8~14 3/8 340~365
4# Ⅱ 16~17 406~432
Manual tong type C:
Lug Jaw No. Short Jaw No. Hinge Jaw No. Pipe Size Rated Torque
in mm KN•m
1# 1# / 2 3/8-3.668 60.33-93.17 48
2# 1# / 2 7/8-4 1/4 73.03-108
3# 1# / 3 1/2-5 1/4 88.9-133.35
4# 1# / 5 1/2-7 139.7-177.8
5# 2# 1# 7-8 5/8 177.8-219.08
6# 2# 2# 9 5/8-10 3/4 244.5-273.05
Manual Tong Type AAX
Lug Jaw No. Pipe Size Rated Torque
in mm KN•m
1# 2 7/8-3 3/4 73-95.25 75
2# 3 1/2-4 1/2 88.9-114.3
3# 4-5 1/4 101.6-133.35
4# 5-7 1/4 127-184.15
5# 6 7/8-8 5/8 174.6-219.1
6# 9-10 3/4 228.6-273.05 40
7# 10 3/4-11 3/4 273.05-298.45
8# 13 3/8 339.7
Other supplier products
|
|
Downhole Motor |
Downhole Motor
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump f... |
|
|
Traveling Block & Hook |
Design Features：
The housing assembly is made of thick section steel plate to provide enough weight.
The wire line is kept taut when hoisting or... |
|
|
Drill Pipe |
Drill Pipe
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardband... |
|
|
SHOCK ABSORBER |
Type SJ
Shock Absorber Type SJ should be connected with the drilling string close to the bit. It can reduce or absorb both longitudinal and circum... |
|
|
Valves |
Check Valve
Usually used for Kill Manifold
The sealing face of core and seat is overlaying-welded with hard alloy with erosion and corrosion resi... |
All supplier products
Same products
