Catheter Vacuum Leak Tester
Catheter Vacuum Leak Tester - Other test instrument - standard
Product Information:
Main Uses of the Catheter Vacuum Leak Tester
The catheter vacuum leak tester is a professional device used to detect leaks in medical catheter systems under vacuum conditions. It is mainly used to ensure the sealing and safety of catheters during use and prevent medical accidents caused by leaks. This tester can be widely applied to the leak detection of various medical catheters, such as suction catheters, drainage catheters, anesthesia catheters, endotracheal tubes, etc.
Compliance Standards
GB 15812.1 - 2005 *Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods* GB 8368 *Disposable Infusion Sets* YY 0489 - 2004, etc.
Technical Parameters
- **Measuring Range**: Usually 0 to - 90kPa, which can meet the negative - pressure testing requirements of various catheters. - **Accuracy**: Generally reaching level 0.1 to ensure the accuracy of test results. - **Vacuum Maintenance Performance**: Equipped with an automatic pressure - holding function to ensure the stability of the vacuum during the test. - **Test Time**: The setting range can be from 1 to 99999 seconds, with an error not exceeding ±1 second. - **Power Supply**: Usually 220VAC 50Hz or 120VAC 60Hz to adapt to the voltage requirements of different regions. - **Net Weight**: Depending on the model, the net weight is approximately 20kg.
Send product request
Other supplier products
 |
Shoelace anti-siphon tester | Product Introduction: Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon wate... |
 |
Wire Torsion and Winding Tester | Product Introduction: Metal wire twisting and winding machine is widely used in aerospace, metal material processing, tire manufacturing and other... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
 |
G651 national standard shoe bending tester | National standard shoe bending testing machine is specialized in testing finished shoes and soles, after a long time, fixed frequency, fixed Angle ... |
 |
Automatic Reaction Calorimeter/ Fully Automated Calorimetry System/ Fully Automated Calorimetry System | Product Features： 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
