Downhole Motor
Downhole Motor
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss between inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed to the bit. The downhole motor property mainly depends upon its property parameters.
The motors we provide are with high quality performance for the oil and gas & mine and water, ranging from 1 11/16"OD to 11 1/4"OD, different type and specifications. The motors use for directional, vertical and horizontal drilling well by long life power section, dual safety catch system devices, high torsibility transmission coupling, a flexible and easy to use adjustable bend housing (ABH), a durable and reliable bearing assembly, and a forged output drive shaft with integral bit box. We take the ISO9001:2000 and API Spec-7 as main quality standard, strictly perform technics of inspect and continuously promote level of inspect are core behave for drilling motors.
1. Application for Directional Drilling:
We offers a complete line of high quality motors specifically designed for directional drilling. Our directional motors are available for both water-based and oil-based drilling applications.
Our directional motors include a high performance power section, dual safety catch devices, high performance transmission coupling, a simple and easy to use adjustable bend housing, and a forged output shaft with integral bit box.
Directional Motor Highlights :
• Crossover sub with API box connection
• Dump Valve (optional)
• Upper Safety Catch Sub
• Multi-lobe, Mutli-stage Power Section
Water-based or oil-based mud elastomers available
• Articulated Ball Drive Coupling
• Adjustable Bend Housing (0-3 or 0-4 degrees)
• Bearing Assembly with Seal-Free Technology™ bearings
• Lower Safety Catch Device
• Forged Output Shaft with Integral API Bit Box
• Near Bit Changeable Stabilizer (optional)
2. Application for Vertical Drilling:
The 1-11/16" and 2-1/16" coil tubing motors include a high performance power section, lower safety catch devices, high performance flexshaft coupling, a straight coupling housing, and a sealed bearing assembly with integral bit box.
The 2-7/8" OD and larger workover motors include a high performance power section, lower safety catch devices, high performance transmission coupling, a straight coupling housing, a durable bearing assembly with Seal-Free Technology™ bearings, and an output shaft with integral bit box.
Vertical Drilling Motor Highlights :
• Crossover sub with API box connection
• Integral Float Sub
• Upper Safety Catch Sub
• Multi-lobe, Mutli-stage Power Section
• Articulated Ball Drive Coupling
• Straight Housing
• Bearing Assembly with Seal-Free Technology™ bearings
• Lower Safety Catch Device
• Forged Output Shaft with Integral API Bit Box
3. Application for Horizontal Drilling
We offers a complete line of high quality motors specifically designed for horizontal drilling, the motors include a high performance power section, dual safety catch devices, high performance transmission coupling, a simple and easy to use adjustable bend housing, and a forged output shaft with integral bit box.
Vertical Drilling Motor Highlights :
• Crossover sub with API box connection
• Upper Safety Catch Sub
• Multi-lobe, Mutli-stage Power Section
• Articulated Ball Drive Coupling
• Adjustable Bend Housing (0-3 or 0-4 degrees)
• Bearing Assembly with Seal-Free Technology™ bearings
• Lower Safety Catch Device
• Forged Output Shaft with Integral API Bit Box
Other supplier products
|
|
Drilling Jar |
Mechanical Drilling Jar
Type JZ
This full mechanical drilling jar offers mechanical jarring in both directions. The load scope of the up jarring... |
|
|
Casing accessories |
Casing Scraper
The Casing Scraper is used to clean out the dirt which may be left over internal wall of casing, such as cement scale, sandy soil, ... |
|
|
Manifold |
Ram BOP
Single and double ram type BOPs are widely used in oilfield and offshore platform. They have the features of compact structure, easy handl... |
|
|
Elevators |
Elevators
DDZ Elevators
Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The elevators are ... |
|
|
Drill Pipe |
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardbanding: ARNCO 1... |
All supplier products
Same products
