DSHD-3536 Cleveland Open-Cup Flash Point Tester
A:Brief description:
DSHD-3536 Cleveland Open-Cup Flash Point Tester is designed according the standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method,ASTM D92,ISO2592.
DSHD-3536 Cleveland Open-Cup Flash Point Tester is applies to determine the flash point and fire point of petroleum products which the flash points higher than 79 ℃ except fuel oils.
B:Main advantages
1.The instrument adopts special heating furnace to ensure the safety of test. The heating power is continuously adjustable. It can meet requirements of test.
2.The instrument adopts desktop structure. The stainless steel working table and furnace shell make it beautiful and elegant.
3.The instrument is fully self-contained complete. The operator can do determination as long as connecting with coal gas or other civil gas.
4.The instrument is equipped with flame extinguishing cover which accord with requirements of test.
C: Main technical specifications and parameters
1. Power supply: AC（220±10%）V, 50Hz.
2. Heating device: Quartz tube furnace heating, no naked fire, explosion prevented. The power is adjustable from 0W to 600W.
3. Flame appilication device: Search the flash point automatically.
4. Thermometer: (-6～400)℃, division value is 2℃.The technical specification is accord with GB/T 514.
5. Ignition device: (1) Ignition source: coal gas(or civil gas, the same below)
(2) Bore diameter of spout: 0.8mm
6. Ambient temperature: (-10∼50)℃
7. Relative humidity: ≤85%
8. Overall power consumption: ≤650W
9. Overall dimension: 350mm*290mm*350mm(L*W*H, Thermometer is not included)
Send product request
Other supplier products
 |
DSHD-255A Liquid Asphalt Distillation Tester | A:Brief description: DSHD-255A Liquid Asphalt Distillation Tester is designed according to the T0632 “Test Methods for Distillation Characte... |
 |
DSHD-0324 Steel Mesh Oil Separator for lubricating oil | A:Product Introduction: DSHD-0324 Steel Mesh Oil Separator for lubricating oil is designed according the industry standard of People’s Repub... |
 |
DSHD-509A Engine Fuels Existent Gum Tester | A:Brief description: DSHD-509A Engine Fuels Existent Gum Tester is designed and made as per the national standard of People’s Republic of Ch... |
 |
DSHD-5208D Rapid Low-temperature Closed Cup Flash Point Tester | A:Brief description: DSHD-5208D Rapid Low-temperature Closed Cup Flash Point Tester is designed according GB/T 5208-2008 Determination of flash po... |
 |
DSHD-6536 Distillation Tester | A:Brief description: DSHD-6536 Distillation Tester is designed and made as per standards GB/T6536 Test Method for Distillation Characteristics of ... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
