DSHD-261-1 Pensky-Martens Closed Cup Flash Point Tester
A:Brief description:
DSHD-261-1 Pensky-Martens Closed Cup Flash Point Tester is manufactured as per standards GB/T 261-2008 Determination of Flash Point(Pensky-Martens Closed Cup) and ASTM D93.
DSHD-261-1 Pensky-Martens Closed Cup Flash Point Tester is suitable to make determination of the closed cup flash point of the petroleum products which flash point over 40℃.
B:Main advantages:
1. Single chip microcomputer control technique. LCD screen displays, English man-machine interaction interface. The heating power is continuously step-less adjustable. The rate of heating up is exact, Easy setting for parameters.
2. The LCD screen has prompting menu, prompting input operation interface. It shows the setted parameters, real-time temperatures and other test parameters. Press the “record” button when the flash point appears. The screen will show and reserve the flash point.
3. The structure is newly design and small. Stainless steel table-board looks clean and beautiful. It can be used as long as equipped with gas or other civilian fuels. It is easy to use and test results exact.
C: Main technical specifications and parameters
1.Power supply：AC( 220±10% )V, 50Hz.
2.Heating device:(1) The furnace is silicon carbide material.Power is 600W heating wire.
(2)The heating power is adjustable from 0 W to 600W.
3.Rate of sample’s heating up ：Procedure A: (5～8 )℃/min；
Procedure B :(1～1.5)℃/min；
Automatically control
4.Electric stirring device :(1)Stirring motor:（BYGH101stepping motor）
(2) Driving mode: flexible shaft
(3) Stirring vane size: 8mm×40mm
5.Stirring rate：Accord with the requirements of GB/T 261-2008.
(1) (90～120 ) turns/min,suitable to test procedure A.
(2)(250±10 ) turns/min,suitable to test procedure B.
6.Igniting device: (1) Igniting source: gas（or other civilian fuels，the same below）
(2) Bore diameter: 0.8mm
7.Temperature testing probe ：PT100
8.Ambient temperature ：≤ 35℃
9.Relative humidity：≤ 85％
10.Power consumption of overall unit：≤ 650W
Send product request
Other supplier products
 |
DSHD-30011 Carbon Residue Tester(Electric Furnace Method) | A:Product Introduction: DSHD-30011 Carbon Residue Tester is designed according industry standard of People’s Republic of China SH/T0170 Test ... |
 |
DSHD-265G Low-temperature Kinematic Viscometer | A:Brief description: DSHD-265G Low-temperature Kinematic Viscometer is designed according the Industry Standard of People’s Republic of Chin... |
 |
DSHD-510D Pour Point&Cloud Point Tester | A:Product Introduction: DSHD-510D Pour Point&Cloud Point Tester is designed according the GB/T3535 Test Methods for Pour Point of Petroleum... |
 |
DSHD-265H Kinematic Viscometer | A:Brief description: DSHD-265H Kinematic Viscometer is designed according the national standard of People’s Republic of China GB/T265 Test M... |
 |
DSHD-0232 Liquified Petroleum Gas(LPG) Copper Strip Corrosion Tester | A:Product Introduction: DSHD-0232 Liquified Petroleum Gas(LPG) Copper Strip Corrosion Tester is designed according industrial standard of People's ... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
