Hydraulic Orbit Motors (BMP/OMP series)
Hydraulic Orbit Motor BMP
BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth. Characteristic Features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or series. * Advanced construction design, high power and low weight. |
|
|
|
Code |
|
|
BMP |
|
|
Displacement |
|
|
36 |
|
|
Flange |
|
|
2 |
2-Ø13.5 Rhomb-flange,pilot Ø82.5×8 |
|
4-Ø13.5 Rhomb-flange,pilot Ø82.5×8 |
|
|
H4 |
4-3/8-16 Square-flange,pilot Ø44.4×2.8 |
|
H5 |
4-M10 Square-flange,pilot Ø44.4×2.8 |
|
Output Shaft |
|
|
A |
Shaft Ø25,parallel Key 8x7x32 |
|
B |
Shaft Ø32,parallel Key 10x8x45 |
|
C |
Shaft Ø25.4,parallel Key 6.35x6.35x31.75 |
|
E |
Shaft Ø25.4,splined tooth SAE 6B |
|
R |
Short shaft Ø25.4,parallel key 6.35x6.35x31.75 |
|
F |
Shaft Ø31.75,splined tooth 14-DP12/24 |
|
FD |
Long shaft Ø31.75,splined tooth 14-DP12/24 |
|
G |
Shaft Ø31.75,parallel Key 7.96x7.96x31.75 |
|
T |
Cone-Shaft Ø28.56,parallel Key B5x5x14 |
|
T3 |
Cone shaft Ø31.75,parallel key 7.96x7.96x25.4 |
|
Port and Drain Port |
|
|
D |
G1/2 Manifold Mount 4xM8, G1/4 |
|
M |
M22×1.5 Manifold Mount 4xM8, M14×1.5 |
|
S |
7/8-14 O-ring manifold 4x5/16-18UNC, 7/16-20UNF |
|
P |
1/2-14 NPTF Manifold 4x5/16-18UNC,7/16-20UNF |
|
R |
PT(Rc)1/2 Manifold 4xM8, PT(Rc)1/4 |
|
Rotation Direction |
|
|
Omit |
Standard |
|
R |
Opposite |
|
Paint |
|
|
00 |
No paint |
|
Omit |
Blue |
|
B |
Black |
|
S |
Silver grey |
|
Unusually Function |
|
|
Omit |
Standard |
|
N |
Big radial force |
|
O |
No case drain |
|
F |
Free Running |
|
LS |
Low Speed |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Technical data for BMP with 25 and 1 in and 1 in splined and 28.56 tapered shaft: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Technical data for BMP with 31.75 and 32 shaftt: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
* Continuous pressure:Max.value of operating motor continuously. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE |
||||||||
|
HANJIU |
M+S |
EATON |
DANFOSS |
ROSS |
WHITE |
PARKER |
SAM |
BOSCH |
|
BMM |
MM MLHK |
J SERIES |
OMM |
BGM |
MGX |
|||
|
BMP/BM1 |
MP HP |
H SERIES |
OMP DH |
MF MG |
WP RS |
TC TE TB |
BG |
MGP GXP |
|
BMR/BM2 |
MR HR MLHRW,RW |
S,T SERIES W SERIES |
OMR DS OMEW |
MB |
WR RE |
TF |
BR |
MGR GMR |
|
BMH/BM4 |
MH MLHH HW HWF |
OMH |
ME |
RE |
TG |
|||
|
BMS/BM5 |
MS MSY MLHS |
2000 SERIES |
OMS |
ME |
RE |
TG |
HPR |
MGS GMS |
|
BMT/BM6 |
MT MLHT MTM |
6000 SERIES |
OMT TMT |
MJ |
HT |
MGT,GMT |
||
|
BMV |
MV MLHV |
10000 SERIES |
OMV |
MGV GMV |
||||
Hydraulic orbit motor applications:
Brush cutters
Mower
Haveresting equipment
Forestry equipment
Turf equipment
Send product request
Other supplier products
 |
G5 GEAR PUMP | G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain ra... |
|
|
Hydraulic Orbit Motors (BMP/OMP series) | Hydraulic Orbit Motor BMP BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt th... |
 |
102S Hydraulic Steering Control Unit | 102S hydraulic steering units 1.Hydraulic steering unit is widely used in the steering control system such as the steering system of many kinds of... |
 |
BMT Hydraulic Orbit Motors | Hydraulic orbit motor BMT BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit c... |
 |
TP1-**/13BSS-40-L GEAR PUMP | The TP1-**/13BSS-40-L series gear pumps have the advantages of it’s compact structure, high strength body and its axial clearance automatic c... |
Same products
 |
Water Bulging Bottle Making Machine | Seller: Yongkang Hubang Machinery Technology Co., Ltd. | Yongkang Hubang Machinery Technology Co., Ltd. specializes in machinery for thermos and bottle ma... |
 |
High qiality Industry grade Microcrystalline wax for candle | Seller: Syntop chemical Co.,Ltd. | Industrial microcrystalline wax has a wide range of applications, primarily due to its high melti... |
 |
Automatic Rainbow Lollipop Machine | Seller: Jiangsu Flying Dragon Food Machinery Co., Ltd. | The Automatic Rainbow Lollipop Machine supports the production of colorful rainbow lollipops with... |
 |
TC SERIES 180-210 HP TRACTOR | Seller: TIANJIN TRACTOR MANUFACTURING CO., LTD | Our company has long specialized in the development of high-horsepower wheeled tractors. This par... |
 |
TVH2704-3504（Hybrid Tractor） | Seller: TIANJIN TRACTOR MANUFACTURING CO., LTD | Hybrid tractorsadopt a diesel engine plus motor hybrid drive system. Supported by an intelligent ... |
