Building material decomposition smoke density testing machine
Building material decomposition smoke density testing machine for the stability of the material smoke smoke toxic hazard classification, does not apply to non-stable smoke smoke toxic hazard classification.
Standards compliant:
GB / T20285-2006 "Hazardous Classification of Tobacco Products"
main feature:
1. Device structure is simple, easy to operate, beautiful appearance;
2. It is one of the important criteria to determine the combustion performance grade as A grade composite (sandwich) material;
According to our laboratory in the quantitative preparation of material smoke method and experimental mice acute inhalation flue gas exposure test methodological research results and material toxicity evaluation of the experimental experience developed.
Detection principle:
It is possible to realize the stable thermal decomposition and combustion of the material by the constant velocity air flow and the stable heating furnace. The stable flow decomposition of the material can achieve the stable decomposition and combustion of the material. The flue gas flow with stable composition is obtained.The same material is the most toxic at the same smoke concentration, with sufficient smoke and no flame.
![Building material decomposition smoke density testing machine]()
Building material decomposition smoke density testing machinemain parameters:
1. Power supply voltage: AC220V ± 10%
2. Maximum power: 5KW; Heating power: 1.5KW
3. Test device dimensions; 1800mm × 600mm × 1750mm
4. Temperature range: (300-1000) ℃;
5. Control accuracy: static ± 1 ℃ (maintenance time greater than 2min);
6. Air flow: (0-20) L / min adjustable;
7. Rotation rate of ring furnace: (10 ± 0.1) mm / min.
8. Test device weight: about 460KG
Other supplier products
|
|
Mask Flame Retardant Tester |
Medical mask fire test machineis to determine the fire resistance performance of medical face masks and full face masks. The tester can provide a s... |
|
|
est universal wear friction testing machine and Stoll Quartermaster |
Testing Standards:
ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15J2/BN 112-01
Applications:
Universal Wear Tester, to ... |
|
|
Washing Fastness Tester |
Standards:
ISO 105 C01 C02 C03 C04 C05 C06 C08 D01, BS 1006 C01 C02 C03 C04 C05, AATCC 28 61 86 132 151 190, NEXT TM2 3 5, M&S C4 C5 C10A P3... |
|
|
Anti Synthetic blood penetration tester |
Standards:
GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin... |
|
|
Fogging tester |
Brief Introduction：The fogging tester used to test the properties under certain environmental conditions for leather and fabric fogging phenomenon... |
All supplier products
Same products
