Sp/Spr Vertical Centrifugal Slurry Pump
. Application and Features
Type SP/SPR pumps are vertical, centrifugal slurry pumps that are submerged in sump to work. They are
designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion-resistant metal.
All parts of type SPR pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particles.
The type with "L" is a series of sump pump with an extended shaft, which is suited for the working condition of the deeper lever. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
SSUMP PUMPPERFORMANCE PARAMETERS
|
Type |
Allowable Mating Max. Power(KW) |
Range Of Performance |
Impeller |
|||||
|
Capacity/Q |
Head/m |
Seed/rpm |
Max Efficiency/% |
No.of Vanes |
Impeller Diameter/mm |
|||
|
m³/hr |
L/S |
|||||||
|
40PV-S |
15 |
19.44-43.2 |
5.4-12 |
4.5-28.5 |
1000-2200 |
40 |
5 |
188 |
|
65QV-S |
30 |
23.4-111 |
6.5-30.8 |
5-29.5 |
700-1500 |
50 |
5 |
280 |
|
100RV-S |
75 |
54-289 |
15-80.3 |
5-35 |
500-1200 |
56 |
5 |
370 |
|
150SV-S |
110 |
108-479.16 |
30-133.1 |
8.5-40 |
500-1000 |
52 |
5 |
450 |
|
200SV-S |
110 |
189-891 |
152.5-247.5 |
6.5-37 |
400-850 |
64 |
5 |
520 |
|
250TV-S |
200 |
261-1089 |
72.5-302.5 |
7.5-33.5 |
400-750 |
60 |
5 |
575 |
|
300TV-S |
200 |
288-1267 |
80-352 |
6.5-33 |
350-700 |
50 |
5 |
610 |
SRSUMP PUMP PERFORMANCE PARAMETERS
|
Type |
Allowable Mating Max. Power(Kw) |
Range Of Performance |
Impeller |
|||||
|
Capacity/Q |
Head/m |
Seed/rpm |
Max Efficiency/% |
No. of Vanes |
Impeller Diameter/mm |
|||
|
m³/hr |
L/S |
|||||||
|
40PV-SR |
15 |
17.28-39.6 |
4.8-11 |
4-26 |
1000-2200 |
40 |
5 |
188 |
|
65QV-SR |
30 |
22.5-105 |
6.25-29.15 |
5.5-30.5 |
700-1500 |
51 |
5 |
280 |
|
100RV-SR |
75 |
64.8-285 |
18-79.2 |
7.5-36 |
600-1200 |
62 |
5 |
370 |
ransferredMaterial:
Mining & Mineral Processing (Gold/Copper/Iron Ore/Lead&Zinc/Tin/Wolfram etc.)
Environmental Water & Sewage Treatment
Power & Oil (Bottom ash, lime slurry for FGD)
Chemical Industry (Phosphate/Potash/Chemical Fertilizer etc.)
Food And Other Industry (Sugar/Paper&Pulp/Tobacco)
Dredging (Sand&Gravel)
What are the operations and maintenance of the centrifugal pump?
1 Regularly observe and record the pump's inlet and outlet pressure gauge motor voltmeter, ammeter and bearing thermometer indication values, find abnormal phenomena, should analyze the reasons and deal with them in time.
2 Always listen to the internal sound with the listening needle, pay attention to whether there is friction or collision sound, and if the sound is significantly changed or has abnormal sound, stop the pump immediately.
3 Always check the lubrication of the bearing to see if the rotation of the oil ring is flexible, and its position and oil supply are normal.
4 The temperature rise of the bearing should not exceed 30~40 degrees, and the maximum temperature of the bearing should not exceed 70 degrees.
5 Check if the dripping of the pump packing seal is normal.
6 If it is a large-scale water pump with circulating oil supply, it should also be checked frequently whether the working condition of the oil supply equipment is normal and whether the bearing oil return is smooth.
7 When the bearing is cooled with cooling water, it should also be noted that the cooling water flow is normal.
8 bearing vibration of the running pump also needs to be monitored
Contact Us:
Kevin Liu/Mr.
Hebei Minerco Machinery & Equipment Co., LTD
P:
A: No. 12 Zhongshan Road Mancheng District, Baoding, Hebei, China
Web:
Send product request
Other supplier products
 |
Hot Seal Carbon Steel Hard Seal Double Flange 10 Inch Electric Butterfly Valve | Product DescriptionThe valve is mainly used to cut off non-corrosive fluid. It is also can be designed to have the function of adjusting and cuttin... |
 |
Wholesale Water Meter Gas Lever Handle Full Port Brass Male Thread Pn16 Brass Ball Valve | Product Description Product: Valve Parts Material:brass, iron Surface finish process:Blacking/polishing/anodize/chrome/plating/zinc plating/nicke... |
 |
ANSI Forged Steel A105 Fully Welded Body Ball Valve | Product Description Features of forged trunnion ball valves are as follows: 1) Anti-fire safe design:API 6FA, API607 2) Anti-static device The stat... |
 |
Ih Series Stainless Steel Horizontal Chemical Pump for Industrial Project | Product Description Product classification:Stainless steel corrosion-resistant centrifugal pump Flow:4m3/h-200m3/hHead:15m-125mApplicable medium... |
 |
Corrosion Resistance PTFE Seat Wafer Stainless Steel Butterfly Valve | Product DescriptionThe valve is mainly used to cut off non-corrosive fluid. It is also can be designed to have the function of adjusting and cuttin... |
Same products
 |
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |
