Performance Aluminium Louvre System
As an aluminium section company, Otalum supplies a comprehensive range of over 1000 different standard aluminium profiles in a wide spectrum of specifications and dimensions.
Aluminum louver windowsare used on most buildings in some form or another. Aluminium louvre systemusually provide airflow, both intake and exhaust, while protecting these openings against rain. Often the better a louver is at letting air through, the worse it is likely to be at keeping water out. A standard louvre will provide the maximum airflow required with some degree of rain defence. The standard louvers tend to be preferred for projects where the high free area is important and occasional water penetration will not cause significant problems.
Performance Louveris a louver whose profiles are Aerodynamically designed to maximize airflow through with minimum resistance and rainwater is a trap and collect to louver mullion drain system. Performance louvre is weather louver that is tested to EN 13030 Standard with wind-driven rain at Velocity 13 m/s and rain spray at 75 L/h plus. Air suction at 0 – 3.5 m/s by BSRIA (UK).
INNIVATE LTD
INNIVATE LTD is a leading supplier of performance louver in Singapore. With over 30 years' experience, INNIVATE performance louvres are designed to protect against the onslaught of wind-driven rain, especially in Asia. All their products are derived from 3rd party independent testing to BS EN 13030:2001. Last few years, they took part in some big-scale projects globally, such as Jewel Chanqi Airport (Singapore, 2019), MICRON (Singapore, 2020), ICONSIAM (Bangkok, 2018) and 390 Madison (New York, 2018).
As a professional aluminium extrusion factory, Otalum has built long-term cooperation with INNIVATE. Not only has Otalum successfully supplied INNIVATE the excellent aluminium extrusions, but we have also brought their products to the markets we are working on. If you have interested in a performance louvre, pls don't hesitate to contact us.
Send product request
Other supplier products
 |
Aluminum Extrusions | OTALUM was founded in 1984 and after 36 years' development, we have now already become a professional aluminium profile manufacturerfor architectur... |
 |
Aluminium Square Bars | Otalum was founded in 1984 and after 36 years' development, Otalum has become a professional aluminium section manufacturerfor architectural system... |
 |
Industrial Aluminum Profile | Otalum’s served markets also include a variety of industrial and consumer-based markets known as "Industrial Markets". These are comprised of... |
 |
Aluminium Square Bars | As an aluminium extrusion factory, Otalum supplies a comprehensive range of over 1000 different standard aluminium profiles in a wide spectrum of s... |
 |
Aluminium Round Bars | Aluminium alloy round baris frequently used in the transportation, construction and aviation industries due to its excellent strength to weight rat... |
Same products
 |
Bottle Cap Mold | Seller: Taizhou Qihong Mold Co., Ltd. | Bottle Cap Mold is designed for precise and consistent plastic cap production, supporting differe... |
 |
High quality beeswax used in craft production | Seller: Syntop chemical Co.,Ltd. | Beeswax has a wide range of uses in handicrafts, appearing in everything from traditional candles... |
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
