Rack Mount Power Amplifier 350W 450W 650W
※ CE & RoHS certified.
※ Power rates: 350W/450W/650W available.
※ Aluminium alloy panel with standard 19" 2U height.
※ 100% pure copper toroidal transformers.
※ TOSHIBA amplifier transistors.
※ RCA and XLR socket for convenient link.
※ 70V, 100V and 4~16Ω outputs.
※ Output short circuit,overload,high temperature protection and alarm.
Description
Besides integrated amplifiers RH-AUDIO also manufacture power amplifiers,which boost current gain by receiving
the lower-power audio signals from preamplifier or mixer to drive the connected loudspeakers.
The rack mount power amplifieris assembled with all the elements in a 2U chassis offering 350/450/650 watts,
available with either 70/100-volt or 4 to 16 ohms(Ω) loads.
The power amplifiers features XLR and 6.35mm input sockets also a group of link output to supply audio signal to additional amplifiers.
And features many of the same comprehensive protection circuits typical, complete protection is provided for
output short circuit,overload,high temperature,peak current limiters.
Specification
|
Model |
RH2836W |
RH2846W |
RH2866W |
|
Rated Power |
350W |
450W |
650W |
|
Output Terminals |
Low impedance:4-16 ohms(Ω) |
||
|
350W |
Voltage line:70V(13.6 ohms(Ω)) 100V(27.8 ohms(Ω)) |
||
|
450W |
Voltage line:70V(10.7 ohms(Ω)) 100V(21.7 ohms(Ω)) |
||
|
650W |
Voltage line:70V(7.4 ohms(Ω)) 100V(15.1 ohms(Ω)) |
||
|
LINE Input |
10k ohms(Ω) < 1V ,unbalanced |
||
|
AUX Output |
10k ohms(Ω) 0.775V (0 dB) ,unbalanced |
||
|
Frequency Response |
60 Hz ~ 15k Hz (± 3 dB) |
||
|
THD |
<0.5% at 1kHz,1/3 of rated power |
||
|
S/N |
>70 dB |
||
|
Damping Factor |
200 |
||
|
Controls |
Volume control,power switch |
||
|
Cooling Fan |
DC 12V FAN |
||
|
Indicator |
AC:‘POWER’,‘CLIP’,‘SIGNAL’,‘PROT’,‘TEMP’ |
||
|
Protection |
AC FUSE×10A |
AC FUSE×12A |
AC FUSE×15A |
|
AC FUSE×1,short circuit,overload,high temperature |
|||
|
Power Cord |
(3×1.5 mm2)×1.5M (Standard) |
||
|
AC Power |
AC110V~120V, AC220V~240V 50-60Hz optional |
||
|
Consumption |
485W |
620W |
880W |
|
Dimension |
89(H)×483(W)×366(D)mm |
||
|
Packing Size |
185(H)×520(W)×435(D)mm |
||
|
Net Weight |
|||
|
Gross Weight |
|||
Front & Rear Panel Details:
RH-AUDIO Power Amplifier Panel Details
Interior Main Parts:
RH-AUDIO Power Amplifier Main Parts Inside
Reference Connection:
RH-AUDIO Power Amplifier Connection
Note:
Select only one output terminal of 70V,100V or 4-16 Ohms to be with COM.
Never use two "hot ends" to join together.
If other outputs are needed,please use the LINK output to connect another power amplifier.
Installation of Rack Mount Power Amplifier
Front amplifier is generally connected to the pure post stage amplifier, the front amplifier is used to amplify the voltage, the pure post amplifier is used to the amplify the current, the front amplifier is the link equipment between the various sound source devices and the power amplifier, as the output signal electrical level of the sound source equipment is low, the power amplifier can not work properly. The function of the front amplifier is exactly to amplify the signals.
The front stage is the voltage amplifier, which is also the part that influences the timbre the most in the whole equipment. The post stage is the current amplifier which is the real power amplifier part and has great influence on the dynamic and low frequency control power. The general power amplifier should be called the front and the post stage combined mixer amplifier. If we just talk about the technology, the front stage is more demanding than the post stage, which is more difficult to be done well. If you want to add special power lines, we shall not add good power lines in the post stage because the current of the post stage is large, we should add these good lines in the front stage.
The front stage includes the matching of input impedance, the amplification of the input signal voltage, the sound enhancement circuit of some amplifiers, the tuning circuit of the tone, etc. The post stage is mainly responsible for the amplification of the frequency, which is mainly the amplification of the current. Therefore, the quality of the front stage of the power amplifier is directly related to the quality of the power amplifier.
The front stage is mainly used to provide appropriate audio electrical level signals for the post stage and adjust the sound quality such as the high and low bass effect, the left and right channel volume and so on. The post stage, commonly known as pure post stage, it simply amplifies the audio signals provided by the front stage to provide enough power to drive the commercial pa speakers.
Send product request
Other supplier products
 |
2.4G Wireless Speaker with Built-in Amplifier | The RH-AUDIO2.4G Wireless Speaker RH609GF with Built-in Amplifier is designed with passive or active crossovers built into them,consists of one... |
 |
30W Outdoor Sound System Speaker Waterproof | The RH-AUDIO30W Outdoor Sound System Speaker Waterproof RH-KT27 is designed with mushroom shape for outdoor applications, The highly weather resist... |
 |
Ceiling Speakers | The RH-AUDIO commercial are commonly made with built-in transformers which suit both 70V and 100V high-voltage commercial audio distribution system... |
 |
Fashionable Voice Evacuation System Speaker RH-MS85 | Fashionable voice evacuation speakerRH-MS85 ※ Rated power 30W at 100V. ※ 2-way wall mount speaker system. ※ Built-in 100V transformer. ※ Woofer 4" ... |
 |
Horn Speakers | Horn Speakers The RH-AUDIO Horn Speakers are made from robust,virtually indestructible ABS or alloy enclosure,and adjustable alloy brackets offerin... |
Same products
 |
Common Rail injector control valve F00V C01 365 & Common Rail injector control valve F00V C01 368 | Seller: zhonglutong | Common Rail injector control valve F00V C01 365 Common Rail injector control valve F00V C01 368 C... |
 |
Common Rail injector control valve F00V C01 362 & Common Rail injector control valve F00V C01 363 | Seller: zhonglutong | Common Rail injector control valve F00V C01 362 Common Rail injector control valve F00V C01 363 C... |
 |
Common Rail injector control valve F00V C01 358 & Common Rail injector control valve F00V C01 359 | Seller: zhonglutong | Common Rail injector control valve F00V C01 358 Common Rail injector control valve F00V C01 359 C... |
 |
Common Rail injector control valve F00V C01 355 & Common Rail injector control valve F00V C01 356 | Seller: zhonglutong | Common Rail injector control valve F00V C01 355 Common Rail injector control valve F00V C01 356 C... |
 |
Common Rail injector control valve F00V C01 352 & Common Rail injector control valve F00V C01 353 | Seller: zhonglutong | Common Rail injector control valve F00V C01 352 Common Rail injector control valve F00V C01 353 C... |
