12 Inch Butterfly Valve
Description of 12 Inch Butterfly Valve:
Most of ZECO 12 butterfly valveoperated by hand-wheel, wrench and handles, pay attention to the operation speed, neither too fast nor too slow, and exert force at proper position. End position is vital important to valve performance. In Close position, ball shall be at right position to seat. The closure parts of the valve seat so close to the campaign and leave the valve seat, the valve sealing performance depends in part on the relative pieces of stem-driven closure of the valve seat to remain sealed and the resulting mechanical force. If the role of a particular incident in the direction of the closure of the closure of the pressure to close the case up from the seat, and that this power is essential. Most of the internal closure of the sliding piece in the valve seat does not rely on force stem seals, but this type of valve position to close the right thing or not is very important. In some cases, when the closure parts close to the final closed position, the driving force needed to close the case may be greatly increased, to reach the required position has been shut down parts of an auxiliary compression. Close cases are not accessible or not stopped in the customs location will have a seal leak and damage. Butterfly Valves requires right position to guarantee sealing. When the indicator shows Close position, movement shall be stopped.And now the 12 inch butterfly valve priceis very reasonable.
Features of 12 Inch Butterfly Valve:
Material of 12 Inch Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A216 WCB + 13Cr |
|
2 |
Seal Ring |
Graphite + SS304 |
|
3 |
Retainer Flange |
ASTM A105 |
|
4 |
Pin |
ASTM A276 410 |
|
5 |
Disc |
ASTM A216 WCB |
|
6 |
Stem |
ASTM A276 410 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS304 + PTFE |
|
9 |
Bolt |
ASTM A193 B7 |
|
10 |
Nut |
ASTM A194 2H |
|
11 |
Yoke |
ASTM A216 WCB |
ZECO Valve Group is one of professional gate valve manufacturers China. We provide Electric Ball Valve, Pneumatic Ball Valve, trunnion mounted ball valve Chinaand so on. Want to know about difference between gate and ball valve? Please contact us.
Send product request
Other supplier products
 |
Gate Valve | The resilient seated gate valveof ZECO is widely used and reliable in the water supply and drainage system of water supply company, sewage company,... |
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been p... |
 |
Bronze Adjustable Dynamic Flow Balancing Valve | Basic information This bronze adjustable dynamic flow balancingvalve is required to maintain the flow of these pipes or end equipment at all times ... |
 |
Ball Check Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
 |
Balancing Valve | ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y... |
