Trimethylchlorosilane (M3)
Name:
Trimethylchlorosilane
Feature:
Trimethylchlorosilane is a colorless or light yellow transparent irritating liquid.
CAS No.: 75-77-4
Technical Data of Trimethylchlorosilane
|
Testing Items |
Testing Standards |
|
Trimethylchlorosilane /% |
≥ 99.5 |
|
Methyltrichlorosilane /% |
≤ 0.05 |
|
Tetrachlorosilane /% |
≤ 0.05 |
Description of Trimethylchlorosilane
Trimethylchlorosilane is colorless transparent liquid, and it is volatile, easily hydrolyzed in humid air to free hydrochloric acid. It is soluble in benzene, ether and perchloroethylene. Besides, chlorotrimethylsilaneis flammable, toxic and corrosive. Sealed and stored in a cool and dry place. Store in a low temperature ventilated place, away from fire and heat source. Separate storage and transportation with oxidizers, acids and bases.
Trimethylchlorosilane Uses
Trimethylchlorosilane is mainly used in the production of end-capping agent MM, silazane, cephalosporins antibiotics, active group protectors, etc.
Storage and Transportation of Trimethylchlorosilane
Storage: Stored in a shady, cool, and ventilated place. It should be kept away from kindling and heat sources, avoid direct sunlight.
Transportation: When transported, avoid rain and direct sunshine.
Health Hazards of Trimethylchlorosilane
Invasion route: inhalation, ingestion, transdermal absorption.
Health hazards of trimethylchlorosilane: Strong irritation to respiratory tract and eyes, skin mucous membrane. Inhalation can cause death due to spasm and edema of larynx and bronchus, chemical pneumonia, pneumonia and pulmonary edema. Exposed workers often have eye pain, tearing, coughing, headache, nausea, vomiting, wheezing, easily agitated, and itchy skin.
Toxicological information and environmental behavior
Hazardous characteristics of trimethylchlorosilane: Flammable, in contact with high heat, open flame or with oxidizing agents, there is a risk of causing combustion and explosion. Release toxic and corrosive fumes when heated or exposed to moisture liberation heat. Corrosive.
Combustion (decomposition) products: carbon monoxide, carbon dioxide, silicon oxide, hydrogen chloride.
Leakage Emergency Treatment of Trimethylchlorosilane
Quickly evacuate personnel from the leaking contaminated area to a safe area, and isolate and strictly limit access.
Cut off the source of fire.
It is recommended that emergency response personnel wear self-contained positive pressure respirators and fire protective clothing.
Do not come into direct contact with the spill.
Cut off the source of the spill as much as possible and prevent access to restricted spaces such as sewers and drainage ditches.
Small leakage: mix with sand, dry stone type or soda ash. You can also brush the emulsion with non-flammable dispersant making surface, and dilute the washing solution into the wastewater system.
Large amount of leakage: Construct a dike or dig a pit to shelter. Cover with foam to reduce vapor disaster. Transfer to tanker or special collector with explosion-proof pump, recycle or transport to waste disposal site for disposal.
Zhongtian is a professional silicone products manufacturer, we provide silicone products. Want to know more? Contact us now.
Send product request
Other supplier products
 |
Silicone Rubber (HTV) | HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen b... |
 |
Methyl Vinyl Silicone Rubber | Name: Methyl Vinyl Silicone Rubber Feature: High temperature resistant Appearance: Colorless and transparent, no obvious mechanical ... |
 |
Methyltrichlorosilane (M1) | Name: Methyltrichlorosilane(M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce... |
 |
RTV Silicone Rubber | Silicone rubber is a straight chain of high molecular weight polysiloxane, molecular weight is generally more than 150,000, its structure is simila... |
 |
Octamethylcyclotetrasiloxane (D4) | Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 Octamethylcyclotetrasiloxane CASNo.: 556-67-2 Ph... |
Same products
 |
Fischer Tropsch wax candle raw material with 52℃ melting point | Seller: Syntop chemical Co.,Ltd. | When making jar candles, the wax is typically poured directly into a cup-shaped container, which ... |
 |
Cold Glaze Stabilizer (Glazemate) | Seller: Marine Hydrocolloids | Meron’s Cold Glaze Stabilizer Glazemate, a ready to use Neutral Cold Glaze Stabiliser, whic... |
 |
Pectin | Seller: Marine Hydrocolloids | Meron Pectin is a structural polysaccharide of the cell wall of plants, Commercial pectin is comm... |
 |
Milk Shake Stabilizer | Seller: Marine Hydrocolloids | Meron’s Milk Shake StabilizerOur Milkshake Stabilizer has been designed to provide creamy m... |
 |
Flavoured Milk Stabilizer | Seller: Marine Hydrocolloids | Meron’s Flavoured Milk StabilizerFlavoured milk drinks are sweetened dairy drinks, typicall... |
